Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F25 Auxiliary Heater retrofit
15-12-2023, 15:23 PM,
Post: #31
RE: F25 Auxiliary Heater retrofit
In this case, the equipment is correct and only installation problems need to be solved.
Quote this message in a reply
31-01-2024, 16:49 PM, (This post was last modified: 31-01-2024, 16:55 PM by Edgars.)
Post: #32
RE: F25 Auxiliary Heater retrofit
I don't want to change IHKA or Webasto control module to VEVO. I did a cooler thing - I installed a GSM module that supports W-bus. The controller has a PWM output for the Blower motor.
Now I can run Webasto from the phone. You don't need a remote control or remember to set the time. I got up in the morning and turned it on 20 minutes before departure. It is possible to make a schedule according to the calendar.
Thanks Pugachov Sergiy from Ukraine. It was from him that I purchased the controller.

Webasto ThermoCall can be used


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Retrofit comfort access BMW f26 santopalermo 8 107 5 hours ago
Last Post: DayvG
  F25 cic retrofit hero3838 3 64 Yesterday, 15:44 PM
Last Post: Siki78
XZBMW G21 paddles retrofit bm92 5 190 09-05-2024, 21:07 PM
Last Post: bm92
XZBMW Is it possible to retrofit G30 seat to G20? hitit 0 84 08-05-2024, 14:22 PM
Last Post: hitit
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 892 470,053 07-05-2024, 04:30 AM
Last Post: SkeYT
  retrofit USB BMW E63 Jalami 7 142 06-05-2024, 18:48 PM
Last Post: stecom90
  Bmw G31 retrofit Mgu id7 atm problem intranet 20 2,527 26-04-2024, 08:06 AM
Last Post: smilo
  Kafas issue aftrer ACC Retrofit It3_Magic 14 689 23-04-2024, 07:44 AM
Last Post: It3_Magic
  G82 rear tail lights CSL retrofit Sauron 10 817 20-04-2024, 07:35 AM
Last Post: SANYA
XZBMW Neck warmer retrofit Just2fast5 5 405 17-04-2024, 11:20 AM
Last Post: Spirit5676

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content