Advanced Search
Hello There, Guest! Login — Register
Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Ista D 4.10.20 failed to start
24-01-2019, 15:20 PM, (This post was last modified: 24-01-2019, 15:20 PM by Shinoby.)
Post: #11
Shinoby Offline
Member
Members 		Posts: 307
Threads: 6
Threads: 6
Thanks Received: 140 in 73 posts
Thanks Given: 156
Joined: Sep 2016
Reputation: 31
RE: Ista D 4.10.20 failed to start
(23-01-2019, 14:20 PM)Lemta Wrote:  
(23-01-2019, 07:45 AM)Shinoby Wrote:  
(22-01-2019, 23:48 PM)rickynguyen Wrote:  I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong.
Does BLP/SDP required for ISTA-D start normally ?
BLP needed!!!

@Shinoby
I've been told BLP not required for diagnostic only. There seems to be lots of conflicting information regarding this. Anyway, I have installed without BLP and ISTA starts fine - I have only done fault scans so I don't know whether things such as headlight calibration works or not. Can you clarify what would not work without BLP, Shinoby?
Basic Logistic Programming (BLP) is required in ISTA+ to work with basic functions without the need for coding/flashing.
SDP (equivalent to psdzdata) - a set of firmware for ISTA +. Used for programming F, G, I series.

Don't forget press [Image: tyl_add.png] and [Image: postbit_reputation.gif], if my post helped you.
(23-01-2019, 14:20 PM)Lemta Wrote:  
(23-01-2019, 07:45 AM)Shinoby Wrote:  
(22-01-2019, 23:48 PM)rickynguyen Wrote:  I use ISTA-D for diagnostic only, so i dont download BLP/SDP. Correct me if i was wrong.
Does BLP/SDP required for ISTA-D start normally ?
BLP needed!!!

@Shinoby
I've been told BLP not required for diagnostic only. There seems to be lots of conflicting information regarding this. Anyway, I have installed without BLP and ISTA starts fine - I have only done fault scans so I don't know whether things such as headlight calibration works or not. Can you clarify what would not work without BLP, Shinoby?
Basic Logistic Programming (BLP) is required in ISTA+ to work with basic functions without the need for coding/flashing.
SDP (equivalent to psdzdata) - a set of firmware for ISTA +. Used for programming F, G, I series.

Don't forget press [Image: tyl_add.png] and [Image: postbit_reputation.gif], if my post helped you.
  • BMW software remote installation via TeamViewer.
Quote this message in a reply
[+] 1 user says Thank You to Shinoby for this post


Messages In This Thread
Ista D 4.10.20 failed to start - by rickynguyen - 22-01-2019, 04:14 AM
RE: Ista D 4.10.20 failed to start - by Twoone - 22-01-2019, 08:11 AM
RE: Ista D 4.10.20 failed to start - by Shinoby - 23-01-2019, 07:45 AM
RE: Ista D 4.10.20 failed to start - by timelord - 22-01-2019, 08:26 AM
RE: Ista D 4.10.20 failed to start - by inspi1981 - 23-01-2019, 10:48 AM
RE: Ista D 4.10.20 failed to start - by Lemta - 23-01-2019, 14:20 PM
RE: Ista D 4.10.20 failed to start - by Shinoby - 24-01-2019, 15:20 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,775 703,838 1 hour ago
Last Post: Sedoy
  ISTA issues on G05 X5 330d 7 182 11 hours ago
Last Post: that4chanhacker
XZBMW ISTA 4.33.30 The programming system could not be initialised Edward1968 40 8,500 01-06-2024, 09:50 AM
Last Post: iyade46
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 131 16,277 31-05-2024, 13:32 PM
Last Post: CATAHA
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 42 8,830 30-05-2024, 19:52 PM
Last Post: mars13
XZBMW ISTA+ 4.47.3x Install Files - MEGA shawnsheridan 11 1,871 29-05-2024, 04:50 AM
Last Post: ivanp
  Lowering g05 lci with ista Zenel6GT 16 764 28-05-2024, 12:59 PM
Last Post: NeRkO20
  ISTA 4.47 programming N/A Neon10 7 505 28-05-2024, 07:46 AM
Last Post: Thomas77
  ISTA 4.46.30 can't finish the diagnosis spiridon 1 218 28-05-2024, 07:32 AM
Last Post: flterence
XZBMW ISTA Czech Database ( 4.42.XX - 4.47.XX) inspi1981 67 8,359 27-05-2024, 13:22 PM
Last Post: inspi1981

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content