[e46ad]

Hi,

I would like to know if anyone knows how to connect the Icom with DIS. 

I have an oem Icom, and it works with the Insta D and Insta P, but tried to configure it with DIS without success. I've tried to use the Bridge option for the VMware and changed to Static IP in the ICOM LAN configuration to 192.168.68.1. But without success. 

Thanks in advance  

Hello I use DIS all the time with my ICOM it doesn't need anything fancy doing,


Use EASYConnect and I tool Radar,

Get IP from Itool, Open EasyConnect,

Type = Remote

IP = From ICOM in Itool

Mode = Diagbuss

Select ICOM Lock and click CHECK 

VM Network editor, 192.168.68.0 Subnet 192.168.68.1

Inside the VM Image set to VMnet1 as the adpator

You should now see both the Green and Red Lights on easyconnect come on,

Load INPA up you should now SEE the X2 Black Dots ready,

This is proven to work IN DIS-GT1 with Fisters Emulation.