[DayvG]

What Claw says, once you have restarted after clearing FSC using tool32. Writedataidentifierbyvin using your vin as you have a repair pack. Then store each FSC, then load the .der file in options FSC. Then use comfort mode, load FSC then upgrade button for each one. There are lots of guides for loading FSC, very similar to mine that I posted but for NBT

---

This is the output of tool32:

apiJob("NBT","_steuern_delete_persistency_intel_plus_swt","swt","")

Satz : 0
 OBJECT                          = nbt
 SAETZE                          = 1
 JOBNAME                         = _steuern_delete_persistency_intel_plus_swt
 VARIANTE                        = NBT
 JOBSTATUS                       =
 UBATTCURRENT                    = -1
 UBATTHISTORY                    = -1
 IGNITIONCURRENT                 = -1
 IGNITIONHISTORY                 = -1
Satz : 1
 JOB_STATUS                      = OKAY
 _REQUEST                        = 4 Bytes
   0000 : 31 01 FD E4                                        1.ýä
 _RESPONSE                       = 4 Bytes
   0000 : 71 01 FD E4                                        q.ýä



If i run CPS-lesen i get the wrong VIN.
I changed the VIN using Esys. ISTA is not returning any error after changing VIN using esys.

Delete FSC ( i use SWT in argument box, not sure if it makes any difference), then reboot.
You need to have the right VIN to import the repair FSC's. Use "writedatbyidentifiervin", under FSC extended.

As you can see this is what i'm trying to do, also using the SWT argument.
I have written "writedatabyidentifiervin" using FSC extended. But when Reading it using cps-lesen command in tool32 i get the old VIN.

After running _steuern_delete_persistency_intel_plus_swt the FSCs are still there so i can't write the FSCs from my repair kit.

After these steps have you tried loading the FSC?