[masa52]

check hpfp waveform using scope as described in ISTA to rule out the pump

Hi Bud

There is no any abl for high pressure pump test
only found this tests 
pictures attached
thanks for help

---

do a test, trick the control unit and tell it that the engine is cold to see if it starts well.
put the sensor outside with ice or put resistance in the sensor and tell us how it works

Hi the question is which sensor
I done previously and disconnected coolant sensor but dde shows correct engine temp
Maybe oil temp sensor is responsible for showing engine temp but the acces is not easy like coolant sensor 
but I dont think so this will work as if the engine is cold dde increase amount of fuel rail pressure and car starts fine