Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E60 Engine Swap VO issue
22-04-2022, 19:08 PM,
Post: #1
|
|||
|
|||
E60 Engine Swap VO issue
HI there,
I want to thank you everyone who helped me on here on the engine swaps, I have a E60 with S85 to N54 swap, it has been running great physically, since the swap, I transplant the engine/MSD81 to the donor car with everything else remain attached, one issue I have is that the OBD port will only work with K-CAN/D-CAN cable, dongle such as Thor , when I plug in regular OBDII reader for emission, it will not connect, so knowing the pin 6 &14 works (verified) to KGM (PT-CAN and K-CAN) , I know the network is working, however I have a feeling that the DME not shaking hand with the OBD reader 0x78 with a required respond. As I was going through the MSD80 option on NCSDummy, I noticed one of the option is the communication protocol, but I can't seem to locate the 62MOT module pop up, VO is not correct ( I don't see an option for engine ) , however the coding for CAS were selected N54U30 , I also noticed when I connect ISTA to the car, it still shows the S85 chassis and not the N54 engine. Anyways, , I just want to have the option to connect to the OBDII reader , can someone shed light on what I have done wrong? and how to correct it? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content