Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F31 437m rubbing on the rear, camber -1 ?
02-05-2022, 10:00 AM,
Post: #4
|
|||
|
|||
RE: F31 437m rubbing on the rear, camber -1 ?
Your rear tires are:
1. about 17mm nearer the outer wheel arch 2. about 3mm nearer the inner wheel arch side than widest factory tires horizontally. They are also nearer about 6mm vertically. You sure it rubs on inner wall? I would bet they rub on outer. So increasing camber (-1 > -2.4) will only WORSEN your situation!!! For the looks - I don't really think anyone sees the width of the tire/rim that much. Unless you frequently drive over people so they have a good look from underside |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
F31 437m rubbing on the rear, camber -1 ? - by XuLeTZ - 02-05-2022, 01:49 AM
RE: F31 437m rubbing on the rear, camber -1 ? - by Node - 02-05-2022, 08:57 AM
RE: F31 437m rubbing on the rear, camber -1 ? - by XuLeTZ - 02-05-2022, 09:10 AM
RE: F31 437m rubbing on the rear, camber -1 ? - by Node - 02-05-2022, 10:00 AM
RE: F31 437m rubbing on the rear, camber -1 ? - by XuLeTZ - 02-05-2022, 10:12 AM
RE: F31 437m rubbing on the rear, camber -1 ? - by Node - 02-05-2022, 10:24 AM
RE: F31 437m rubbing on the rear, camber -1 ? - by XuLeTZ - 02-05-2022, 14:49 PM
RE: F31 437m rubbing on the rear, camber -1 ? - by XuLeTZ - 06-05-2022, 07:53 AM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content