[Krysiaman]

Hi! 
I'm having a problem with G30 with SA606 (entrynav2) rear view camera retrofit (3AG)
I had to add Ethernet Switch because all ethernet ports on BDC were occupied (TCB, KAFAS and HU-B)
Connected ENS module according to wiring diagrams, connected KAFAS and ICAM to it and everything is visible in diagnostics. Flashed HU-B, BDC, ENS and ICAM to the newest software available. Coded whole car with modified VO (+3AG). When I put car in reverse I can see new screen layout for camera, I can change brightness and contrast settings, swith on lines and others so I assume camera is communicating fine with rest of the car. 
THE PROBLEM is that I have no image from camera. Screen is totally black. I have tried 2 cameras. On different car the camera is working. 
I have error code in HU-B - B7F8F8 - Digital video input: no video signal available. Can't find problem using ISTA test plan. No codes in any other module. 

Is it possible that my Entrynav2 doesn't support video image from ICAM2? Esys doesn't want to change any hardware when calculating TAL. 

Entrynav2 HWEL is 36CB-002.001.004
ICAM2  2079-003.004.001
BDC 1DF9-001.001.005

EDIT: What is that "ICAM2-RFK programming in the DO" (see attachment) And is it possible to run without running whole programming plan? ISTA wants me to change idrive controller because it's different part number right now.

[vipsha]

1) Code the entire car using the ESYS (with VCM & MSM update)
2) Remove all errors using the ISTA+.
3) Disconnect the ground terminal from the battery AGM.

[Krysiaman]

1) Code the entire car using the ESYS (with VCM & MSM update)
2) Remove all errors using the ISTA+.
3) Disconnect the ground terminal from the battery AGM.

Are you serious or just trying to score more posts for some reason?

[Mwahab]

Sometimes this happen with me btw, i have to lock ethernet and send car to sleep, and vo all modules not just what i think is dependent.
and check hwel differences when u calc tal with 3AG to check if entrynav2 hwel is different

[qbek90]

Are you checked ethernet BDC-Entry_Nav?

[Krysiaman]

Sometimes this happen with me btw, i have to lock ethernet and send car to sleep, and vo all modules not just what i think is dependent.
and check hwel differences when u calc tal with 3AG to check if entrynav2 hwel is different

Car was sleeping whole night. As I said: whole car was coded with 3AG, and none of the modules have hwel mismatch after Tal calculation except controller which is irrevelant.

Are you checked ethernet  BDC-Entry_Nav?

Yes. It’s fine. Even used it to flash head unit.

I have tried flashing using ISTA to perform this “ ICAM2-RFK programming in the DO” but this nothing changed.

[egyclick]

You're in the same boat with me, also did one, first time I didn't mounted ENT switch, I mounted it after seeing no video was showing on navi, car is updated/coded. Although in official bmw retrofit pdf it shows that Entrynav2 it supports 3AG, I haven't seen actually one with this navi + 3AG camera that works so unless you guys really came across, this makes me believe that it might not be suported and requires nbt evo head unit.

regards!

[larshutten]

I did one couple of weeks ago. After Ethernet switch and wiring according to correct diagram it worked without issues.

Do atm functions work? Just fast check if all eth wires are in the correct pins.

[Fx82]

Do you have the p/n for the ethernet switch?

[markodsk]

Try adding 5DM instead of 3AG to FA and try to calculate TAL. You should see ICAM show up in the modules list and then you can VO code the car and necessary modules (HU_Entrynav2, ACSM5, ICAM, USS (PDC module), BDC_BODY2/3)

See this thread for more info: https://cartechnology.co.uk/showthread.p...608&page=2

---

Although in official bmw retrofit pdf it shows that Entrynav2 it supports 3AG, I haven't seen actually one with this navi + 3AG camera that works so unless you guys really came across, this makes me believe that it might not be suported and requires nbt evo head unit.

I've attached a picture of an X3 G01 made in 2018 with HU_ENTRYNAV2 and 6.5" screen with a rear-view camera. Unfortunately I don't have the VIN, but indeed it is possible and supported by BMW.