[paui]

i bricked my icom a2 today, i changed the serial in the eprom 24c02 and soldered it back in correctly and measured for correct soldering. I then put the ICOM_Restore.bin on a USB stick and plugged it into the icom. after powering up the icom, i tried to hold down the reset button but it didn't show any function, after all this the icom no longer boots correctly. all leds light up red and shortly after the current is supplied, the LAN and the COMM led flash quickly. I only saw afterwards that the reset switch is probably not connected at all, where does it have to be soldered? I have the icom a2 clone with a PCB without wifi.