[Rwik5070]

i'm confused by your statement.
NCS does not use the the VIN from the DME to calculate FA/ZCS.
If you have an incomplete VIN on DME, this is caused by programming with older versions of DIS/Progman.

You can use WINKFP or ISTA/P to reflash DME, even if its the same program number. This was a known problem when cars would fail emissions testing.

If your VIN is stored incorrectly in EWS or LM, you should overwrite it with correct Long VIN with check digit

That is good to know. On some models, bike models, I have seen such incomplete VIN but did not affect the coding. This was the first time when I had to VO code bike while NCS reads incomplete VIN. So, when NCS ask to enter the VIN when changing the VO I was not sure whether to enter the incomplete VIN read by NCS or to enter the actual full VIN. I entered the actual full VIN and changed the VO without issue.

---

What type exactly?

NCS only reads full VIN from EWS/CAS

This was on F800GS bike. Today, same thing on K1200R

its normal