[Fuzzyheed]

**truncated**

Try restoring the software!

Thanks for the reply so quickly!

I tried restoring through USB as I can't access via the IP on the web through port 60080 and this is the log output I got from the USB.

Builddate 2013-07-16 12:26
mount: mounting /dev/mtdblock/config on /config failed
mount: mounting /dev/mtdblock/config on /config failed
=> Updating boot image 1
=> Updating app image 1
mount: mounting /dev/mtdblock/app1 on /app failed
tar: write error: No space left on device
umount: cannot umount /app: Invalid argument
=> Resetting u-boot parameters
Serialnumber: 1120134
Write mac: 00:01:A9:00:EE:E9
=> Cleaning up /config...
=> Set restore.bin counter...
=> Setting flags
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
=> Done.
umount: cannot umount /config: Invalid argument
Success (ATMEL)
=> DONE

This sounds like it has failed as there is no space on the A2 to update the firmware? It appeared to perform the update and the lights flashed as I've read they should. It finished with the system LED flashing green after 2 minutes.

I have a feeling that this clone is broken...