[AROUNDLOCKS]

I have discovered that the rpm signal comes from the crankshaft sensor So from that information I think the signal from the camshaft is for injectors. Can anyone confirm that for me, So more than likely I may have a problem with camshaft sensor.

hi emifive
if crank or camshaft sensor not working you would have fault code
but you say no fault codes stored if that the case then it must be mechanical issue.
put noid light on injector to see if working correctly.
i would of said fuel shut off on pump but if you got fuel pressure then no.
maybe air leak on fuel system somewhere check fuel lines and filter housing drawing air into system.

regards
aroundlocks