[SteelFK1]

I have made it with ISTA, but I have a problem.

I measure rear about 645mm, so I entered ~675mm and it went down a bit, but for whatever reason when I measure it manually it's not at 675, sometimes 670, on the rightside 673, sometimes 669 and on the right side 671, allways diff.

by the constant back and forth testing I no longer know my stock height and I now also have to change the height sensors - now I would like to have the stock height again to start from scratch, is there ne way to get the stock height again?
I think by a very unrealistic number pumps the car again very high (probably original), but if I measure it then and accordingly enter the new value, so the lowering is not correct again.