[moreply]

Hi,

i bought an EVO unit (HWEL 2FC3), that was killed by faulty v850 reset. Not visible in esys.
Fixed it via UART.

Also Unit came without HDD i did use an Intel SSD for Replacement all directories got created everthing is fine. No HDD Error. Maybe SMART is  an issue.

Bootloader can be flashed to the Unit without an issue, but when i try to flash SWFL or IBA it fails  with the Check Memory error. Tried UDS and HTTP.

BOOT CFG:
=========
TS_INFO=0x4031ef80,0x00000080
HW_REV=eModule,d1,0x8,OMAP5432,ES2.0,4GB
IOC_BOOTMODE=2
IOC_BM_INFO=0x40318dc0,0x10


IOC_BM_INFO ptr 0x40318DC0:
32 00 00 00 01 31 FE FF 02 00 00 00 00 53 00 00

SWDL:
-----
32 00 00 00

ONOFF:
------
Wake-Up Reason        : 01  => WUR_BOOTLOADER
Internal Hardware Index: 3_
BootLoader Indication  : _1  => BootLoader Mode
Persistent Mode        : FE  => <UNKNOWN>
Error Reset Count      : FF
IPC Protocol Version  : %00000010
  IPC Version        : %____0010:  => Block IPC on Jacinto and OMAP
  MOST API            : %__00____:  => Initial MOST API
Reserved for future use: 00

RESERVED:
--------
00 00 00

SYSTEM_SETTINGS:
----------------
53 00 00

description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR


Any ideas how to fix this error? Maybe it is the SSD?