Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Change VIN of a RDC unit - BMW motorcycle
01-04-2024, 18:40 PM,
Post: #9
|
|||
|
|||
RE: Change VIN of a RDC unit - BMW motorcycle
(01-04-2024, 08:16 AM)Vojno Wrote: Easy: Hi again, Oddly enough this did not work. I changed all entries related to the RDC in the SVT_ist file I created and then loaded it to Esys. I calculated the SVT_soll file using the changed SVT_ist and then calculated the TAL file. Nothing changed... Nothing is available for update for the RDC and the only option is to remove it. Opening the soll file, all ECUs have entries EXCEPT the RDC. Esys removes it from the soll file, which I created using the shipment I-Step against the most recent available in the psdzdata v4.46.31. Now, could this be happening because this bike never came from the factory with an RDC installed? It does work, I have coded sensors to it using a GS911 and I have the RDC visible in the LCD, after coding the SALAPA code to the FA. Do I need to change the bike to a GS1250 (for example, those came with RDC) to trick Esys to flash the RDC? Or should I edit manually the soll file to add an RDC entry? |