[UP2UP]

Could you please check whether the ATM:
- has a valid GPS status ("3D position" would be perfect)
- has a good ethernet connection (ethernet quality should be above 90 %)

You can use tool32 for this.

Thank you very much.. i will try it and report.

---

Is the ATM version 1 or 2?

If version 1 - then MGU will need FSC 1A6 to disable IPsec to ATM.
If version 2 - ATM has to be validated but it sounds like you have run validation on the car. Check with Esys on the Certificate Management tab - all units should show green - see screenshot attached

Thank you very much poshey, 

it seems i have ATM 1 , and i have check the following FSC and i believe it is not there. ATATCHED. 

ATM is not listed in the certificate management, only HU_MGU and DKOMBI4. 

Appreciate your support to help how i can obtain it the FSC. 

regards,