Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Damaged the EEPROM 95128 in FEM
08-04-2024, 07:14 AM,
Post: #6
RE: Damaged the EEPROM 95128 in FEM
I had a FEM+ Key assembled on a table with a start-stop button and a coil.

I damaged the EEPROM in FEM. But as it turned out, the key memory is not stored in 95128. The old key turns on the ignition
Reputation: +1 - al70 [+1]
Quote this message in a reply


Messages In This Thread
Damaged the EEPROM 95128 in FEM - by wxwwxw - 31-03-2024, 13:49 PM
RE: Damaged the EEPROM 95128 in FEM - by DSESET86 - 31-03-2024, 16:01 PM
RE: Damaged the EEPROM 95128 in FEM - by wxwwxw - 02-04-2024, 18:23 PM
RE: Damaged the EEPROM 95128 in FEM - by DSESET86 - 03-04-2024, 04:25 AM
RE: Damaged the EEPROM 95128 in FEM - by Jumper - 05-04-2024, 20:40 PM
RE: Damaged the EEPROM 95128 in FEM - by wxwwxw - 08-04-2024, 07:14 AM
RE: Damaged the EEPROM 95128 in FEM - by Jumper - 08-04-2024, 14:25 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW MD1/MG1 ISN Extractor from EEPROM Dump Czozen 39 8,491 01-06-2024, 01:57 AM
Last Post: lcy163
XZBMW Bmw g30 atm damaged water redog4dy 13 438 17-05-2024, 20:52 PM
Last Post: redog4dy
  BMW E93 Roc repair eeprom Pedrom92 4 296 14-05-2024, 17:53 PM
Last Post: Superglider
  E85 cluster eeprom VIN location stydly 3 162 08-05-2024, 19:47 PM
Last Post: gabur431
XZBMW CAS2 TO CAS3 EEPROM DEJMIEN 9 332 28-04-2024, 05:58 AM
Last Post: 16eddi67
  F10 FRM III eeprom needed for repair claw 0 96 19-04-2024, 16:16 PM
Last Post: claw
XZBMW BMW 420i B48 (2018) EEPROM/full dump lagunasec 2 186 17-04-2024, 17:07 PM
Last Post: lagunasec
  Eeprom dump needed for EHC E60 Matthew53 0 91 15-04-2024, 22:27 PM
Last Post: Matthew53
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,641 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW Tool for 35160 eeprom Emmy67 19 3,033 28-02-2024, 13:44 PM
Last Post: Adekborys69

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content