[Red_bean_bun]

циLoск method over OBD ?

What’s that about ?

something to know.... there is a циLoск method over OBD thats been ongoing for a couple months however...... this will not gain you any of the benefits of MHD+ for BM3. FEMTO is a custom ROM built from the ground up... so really saying "FEMTO циLoск" is really incorrect terminology... this is not like when we циLoск a older mg1 dme and we are just disabling the disablement. On these DMEs there was never enablement. so FEMTO developed the ROMs from the ground up and built on them collaboratively with tuning suites to allow extra features the original ROMs could never support. Ex (real time tuning, encrypted map space even when dumping) The brilliance behind this is that they still allow them to be downgraded back to original software and writing to write protected areas!

So with the OBD циLoскs that have just come available in the past few months will only allow you to make changes to the calibration area in the dme so none of the program space making the tuning very narrow scoped with limitations. That is until tuning suites get onboard and start developing again under the OBD циLoск method, the biggest phrase is going to be "adoption is key".

There are dozens and dozens of ROMs that would need reworks along with xdfs its a massive undertaking.... so no tuning suite is going to jump on it since they have spent years of hard development on what’s already there unless there is a need for it and to be honest the current MHD+ is going to be far more developed since a lot of the ROM changes cant be done over obd...

But don’t be discouraged there is still a space for this, so no this wont be ideal for running flex fuel or making massive power over stock due to limiters that would need ратснing. However, if you want like a stage 1 or stage 2 tune it for sure can be done within reason. I would believe that would be a good chunk of the user base.


So with the OBD циLoскs that have just came availible in the past few months will only allow you to make changes to the calibration area in the dme so none of the program space making the tuning very narrow scoped with limitations. That is until tuning suites get onboard and start developing  again under method, the biggest pharse is going to be "adoption is key".

There are dozens and dozens of ROMs that would need reworks along with xdfs its a massive undertaking.... so no tuning suite is going to jump on it since they have spent years of hard development on whats already there unless there is a need for it and to be honest the current MHD+ is going to be far more developed since a lot of the ROM changes cant be done over obd...

But dont be discoujraged there is still a space for this, so no this wont be ideal for running flex fuel or making massive power over stock due to limiters that would need ратснing. However if you want like a stage 1 or stage 2 tune it for sure can be done within reason. I would believe that would be a good chunk of the user base.