[spanaz1]

This morning I reset ecu by touching neg and postv terminals now the car is pulsing. but I think the signal is not enough because while cranking the voltage is 7.4volts at the injectors. is it enough to trigger the injectors? or the injectors are flied but also when I try the injector resistance they are 14.7 to 15.2 also when I give them direct 12v and ground they give a strong spray. another thing I tried to remove the rail and point the injectors on wind screen and crank the engine, they spray for some seconds then stop one by one? now I don't know what's going on.

one other thing, before this car came to me the engine was on fire, you can see small burns on the injectors,wiring and pipes.