Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Which power supply for programming
12-03-2017, 21:47 PM,
(This post was last modified: 12-03-2017, 21:52 PM by DNK76.)
Post: #81
|
|||
|
|||
RE: Which power supply for programming
Take two at 65A
plus-plus minus minus and you have a 130A a small voltage drop is provided -grube cables and short after 50cm copper 25mm2 -very strong żabki I at 20A is approximately 0.2V 40A at about 0,3V 65A with a drop to 13V (from 13.5) This Tyll as E91 N47 launch of all all the lights, passing, traffic, directions, fog, automatic climate control on ful windows front and rear, heated seats radio on full only 65A not possible to obtain such tension I can jescze more ista D run windmill air conditioning on full 87A is about nothing more I can not in E91 Normally this e90 8A-17A (jump to 45A) e60 15A- max25A (sometimes jump up to 45 A up to 60A) F30 15A -25 - (like) basically 50A is sufficient and the rest of the reserve, Remember that the battery can not be discharged even though they are DC power supplies and battery is only recharged This large current consumption is sighted by IBS and will show a battery error (For KL15) The power supply is not the battery charger AGM to 14.9V current 1/10 max capacity of the battery is 1 / 4akumulatora more can damage the battery, because the power supply set to a lower voltage 13.8V to 14V or safer the latest series BMW only 14V max If my post helped you hit the thanks and reputation button!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content