[emhtuning]

Hello Gentlemen ,

I see many people already have experience with EVO retrofit in Eseries so Appreciate if someone can share some info in regards to esys coding and access.

I've done the retrofit successfully, Enet wiring is OK , I could read the vin of the EVO by tool32 , I created a new FA with that VIN ( G11 vin ) , but when I try to read the ECU's it shows 0 ECU's .

offcourse I'm connecting to S15A - the GW tcp://169.254.199.99:6801 as usual , also same IP is confirmed by tool32 ,

Also most of the time , I see the network adapter connecting / disconnecting every 2 seconds while EVO is on , once remove the car key and screen is off , I get solid connection .

thanks in advanced for any type of help / advice