[sebastianfernandes]

Hey i would like to help but you've to be more specific. Did you use SET VIN command in SWT DEVELOP before doing anything else? the error you're getting is car server installation error. Yours is a retrofit so can't use a Enet cable off the obd port instead why can't you just hookup an ethernet cable at the back of the quadlock of the cic. You can viginize the CIC by replacing general persistency swt controller with a virgin one and deleting and creating blank data01,data02,data03 files. I would suggest if you have dr ginni installation update your ediabas installation ecu folder with dr gini folder ecu. You will see that gini has made a folder called server in C:\ediabas\bin Copy it's contents and paste in c:\ecapps\carserver.
try it and see if it works..

Hi mate,

Yes i mentioned i installed a fresh VM with Dr Gini B020 with Ediabas and copied server to ec-apps carserver afterwards. Used FStool 2.0.2.1. I also used a fresh installation with carserver from FSTOOL thread, same errors 10848 and 11xxx . All STORE commands work without problems.

And yes, first thing i did was to SET_VIN with my VIN after i changed vin of CIC 63,62,A0 with tool32 to my car's VIN.

Tried the same setup with DCAN cable and ICOM A2 , same results, i am believing is something to do with CIC not being able to get "OEM".

I would connect to quadlock but AFAIK i need a 511ohm resistor to activate ethernet there, and i don't have that.
Don't send me to local radioshack because in Dubai we don't have that


Is it a weird behavior of the patch because i'm not having latest C1A software ? But why did it reboot then , it means it's patched . Maybe virginization didn't work correctly and i still have the old root cert in place...

So why don't you update the cic using winkfp or ista p!! Do you have an icom? And most importantly icom b interface? For Your Info my cic was update last with ista p v57 and the patch worked. Also to get the exact value of the resistor is a bit difficult, so I improvised and used a 1k trim pot and manually set the resistance to 510 ohms. Btw we don't have RadioShack here in India too!!