[Mwahab]

I have 2 B140 units, both of them fails during the BIGGEST SWFL 0000271a

This is the message we get when flashing fails

service routinecontrol CheckMemoryHttp returned unexpected result: debugiInformation_02_FF: ECU: HU_NBT2_63_ETHERNET_63 severity: FATAL ERROR

One unit was patched, and i needed to patch with a new VIN so the provider advised me to to reflash it in order to load the new sets.

The other unit came to me like that, SOFT BIRCKED!


We tried several stuff and all of them failed.

Dowgraded from Btld 5 to 00
Pszdata 60 - 61 - 61.2 - 62 - 59.x
Flashed it with ID4 TAL
Flashed it with the old patched VIN
Flashed over CAN
Flashed over DHCP server
ENET was used during the whole process
Flashed in CAR then in BENCH
Excluded this SWFL from TAL, other were flashed successfully.
Flashed W/O btld
W/O Parallel programming
Esys 3.27 - 3.28
Windows 10
Hard drive can not be accessed via tool32
installed java x64
dissembled the unit, and i didnt found any loose connection.

This the second unit i have like this, and its getting so annoying.

I hope somebody may help, who had ever saw such issue and solved it.
Your help is much appreciated

Several respected brains in Cartech remooted in, ended up with the same eror, they told me to " REFLASH AGAIN AND AGAIN"
others admits it's Soft bricked

Notes: During 271a SWFL, the Flashing takes variable times, from slow to being so fast, the screen sometimes stays at 1%, other times 18% till 30% but the outcome is the same.
A reboot sound is heard during flashing this SWFL, is that normal?

I just thought about flashing it with an ICOM.

These ppl were in during the whole process remotely
@Loliceman
@Bagzbanny

stuff you may need is included as logs, Istep etc

MCDDiagService<id=36900, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlash, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0x63>
[HU_NBT2 - 63 - swfl_0000271a-001_052_004] Transaction type: swDeploy; Message: 2% progress on ECUId:HU_NBT2_0x63 [3% of swfl_0000271a-001_052_004]
[HU_NBT2 - 63 - swfl_0000271a-001_052_004] Transaction type: swDeploy; Message: TA finished
[HU_NBT2 - 63] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:
code: repeat job
description: transfer data repetition counter exceeded; ECU: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: repeat job
description: transfer data repetition counter exceeded; ECU: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] prepareECUforFlash started
MCDDiagService<id=352900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforFlash, service=RC_DEACTIVATE_HDD_SAFE_MODE - RoutineControl DeactivateHddSafeMode, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforFlash, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforFlash, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforFlash, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.uds.hu.MCD3_PrepareECUforFlash, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0x63>
[HU_NBT2 - 63] prepareECUforFlash error
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] negative response error:
code: the result contains an error
description: Service RDBI_ADS has error in result: [Severity=2051][ErrorCode=53311][ErrorCodeDescription=Module offline][VendorCode=20039][VendorCodeDescription=link is no longer active]; ECU: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] negative response error:
code: the result contains an error
description: Service RDBI_ADS has error in result: [Severity=2051][ErrorCode=53311][ErrorCodeDescription=Module offline][VendorCode=20039][VendorCodeDescription=link is no longer active]; ECU: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] finalizeECUFlash started
[HU_NBT2 - 63] finalizeECUFlash finished
[] There was an error, please check the log files.
[] - [Exception - HU_NBT2 - 63] negative response error:
code: the result contains an error
description: Service RDBI_ADS has error in result: [Severity=2051][ErrorCode=53311][ErrorCodeDescription=Module offline][VendorCode=20039][VendorCodeDescription=link is no longer active]; ECU: HU_NBT2_63_ETHERNET
severity: ERROR

[] finalizeVehicleFlash started
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0x10>
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0x10>
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0x63>
MCDDiagService<id=66900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=RC_DAFM_DFM - RoutineControl DeactivateFlashMode, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=66900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=RC_DAFM_DFM - RoutineControl DeactivateFlashMode, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=Physical request to ECU with address 0xdf>
[] finalizeVehicleFlash finished
[] finalizeTALExecution started
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=Physical request to ECU with address 0xdf>
MCDDiagService<id=464900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: timeout, link=Physical request to ECU with address 0xf0>
MCDDiagService<id=464900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeTALExecution, service=RC_TAS_ROUTING - Routine Control for TAS, description=error: timeout, link=Physical request to ECU with address 0xf0>
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "29min 9s". [C206]

Read SVT after TAL execution started.
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.common.MCD3_GenerateConfigFromVehicle, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=Physical request to ECU with address 0xdf>
Read SVT after TAL execution finished.

ESYS LOGS.txt
File Type:
Downloaded:	31 times
Size:	22 bytes