[aka99]

Run the VAS PC, run a test, and verify the error. The following errors can occur:
700.2108 Problem with the K-line
700.2111 Problem with the L-line (possible cause: The VD14 diode is not sealed properly The sticker should be closer to the plug)
700.2113 Problem TJA1050 / TJA1040)
700.2114 Problem with CAN -High (fake, inverted or faulty TJA1054AT / TJA1055)
700.2115 problem with J1850 VPW (, inverted or faulty AU5780A / A5736 AU5780M) faulty OKI M6636, as inverted diode VD7)
700.2230 problem with 3702C (no signal KL15 ignition) possible treatment :
- Short legs 2 and 4 on AU5780.
- Short legs 20 and 21 on M6636.
In TJA1054TA legs are 2 and 3. Short legs?
Repeat the test in VAS-PC.
Important Information: Errors are strictly related. They are not displayed at the same time, but after tests that are performed sequentially.