[JLIT]

I am plan to buy macbook. does any one confirm to use EDIBAS and esys ?

I use EDIABAS and E-Sys with both VMWare Fusion and via bootcamp on my MBPr 2014 without any problems. I've had it running with both Windows 10 and Windows 7.

Of course it's working on old Macbook without USB-C ...

I can't guarantee it would work, but if the Mac can use the adapter to network, then it should be fine. Set VMWare to use bridged networking mode with that adapter, and then manage the IP settings through Windows.

Natively through bootcamp might be a little trickier. The old thunderbolt 2 would only work natively if the adapter was plugged in prior to booting.

Unfortunately I was using bridged mode prior. My issues were that the driver installation upon plugging adapter in both before boot and after came up with errors and troubleshooting solutions weren't effective.