[AROUNDLOCKS]

hi
i doubt zedfull do it as i tried on a focus to no avail its supposed to do alot of things but it dont .
ids vcm should do it if module programming activated
try this below from someone who,s done a pcm on a f150
"Cycle a key in ignition to "RUN". Enter Security Access on the PATS control function module. Select "Parameter Reset" and then exit Security Access. Perform a PCM Keep Alive Memory (KAM) reset."


To do this, once you've plugged the VCMII into the Diagnostics port - click "body>Security>PCM" then after 10 minutes it will grant security access and take you to the security page. From there you select the last line at the bottom that says "Parameter Reset" - This actually resets everything listed in the #7 Procedure. So once that's complete you will program the 2 keys. If it doesn't prompt you to program keys then on that same window select the top line which says "program keys" or something along those lines I don't remember.. 

So anyway long story short I got my friends truck running and it cost me $80 on e--y with a replacement PCM of the exact same part number and Computer Tag/code.

hope this helps
regards
aroundlocks