[Rieger]

I have a 2015 F11 that had entrynav and I put NBT.
I can not put FSC, either by USB or manual. NBT date 2013, F11 date 2015
When trying to flash da-me this error:

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2019/01/03-18:58:56.344
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[] SVK-Ist does not match expected SGBMIDs for ecu ECUId:HU_NBT_0x63. Excpected (relevant process classes only): [hwel_00001295-001_021_021], Actual (relevant process classes only): [hwel_00000df5-001_007_007], Missing SGBMID(s): [hwel_00001295-001_021_021], Surplus SGBMID(s): [hwel_00000df5-001_007_007] [THROWABLE]
[HU_NBT - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT - 63] - [Exception - HU_NBT - 63] SVK-Ist does not match expected SGBMIDs for ecu ECUId:HU_NBT_0x63. Excpected (relevant process classes only): [hwel_00001295-001_021_021], Actual (relevant process classes only): [hwel_00000df5-001_007_007], Missing SGBMID(s): [hwel_00001295-001_021_021], Surplus SGBMID(s): [hwel_00000df5-001_007_007]
[HU_NBT - 63] installECUBL started [PROGRESS]
[HU_NBT - 63] installECUBL finished [PROGRESS]
[HU_NBT - 63] finalizeECUBLUpdate started [PROGRESS]
[HU_NBT - 63] finalizeECUBLUpdate finished [PROGRESS]
[] job failed with negative response error: 
code: ECU is not in correct session after bootloader update has been finished!
description: no detailed description available
severity: ERROR
[THROWABLE]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "3min 22s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.