Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

c3 mux k line error
16-07-2019, 21:59 PM,
Post: #3
RE: c3 mux k line error
(10-07-2019, 09:04 AM)v12nut Wrote:  Hi all,
I have a problem with my c3 not talking to the airbag module, the car Smart Roadster 452.    2015 DAS version

The c3 talks to all the other modules in the car no problem except the srs, I ran a CAESAR test

https://cdn1.imggmi.com/uploads/2019/7/1...d-full.jpg

and the screen shot of the error I receive in DAS

https://cdn1.imggmi.com/uploads/2019/7/1...4-full.jpg

I have swapped the airbag module for a known working one but the same issue , any Ideas ?

cheers

Hi
Do you solved , K-line issue ?

Brs

ART TECH GARAGE
Quote this message in a reply


Messages In This Thread
c3 mux k line error - by v12nut - 10-07-2019, 09:04 AM
RE: c3 mux k line error - by pesona - 10-07-2019, 10:00 AM
RE: c3 mux k line error - by mexanico1971 - 16-07-2019, 21:59 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Xdos 2024.03 version _ novapdf error[Solved] smlee747 0 144 09-04-2024, 08:33 AM
Last Post: smlee747
YTMercedes Xentry error nixte 4 155 08-04-2024, 11:52 AM
Last Post: nixte
  addons error maxs30 0 86 11-02-2024, 14:17 PM
Last Post: maxs30
  xentry start error Ahson wajid 6 402 15-11-2023, 18:29 PM
Last Post: Automotive 1
  Could not extract script from EXE xentry installation error Automotive 1 0 144 08-11-2023, 06:29 AM
Last Post: Automotive 1
YTMercedes Check the ETC device error - removing DSRC unit NTG 5.5 andsol 0 119 29-10-2023, 08:02 AM
Last Post: andsol
  Xentry doesnt start error chillaaa 6 585 05-10-2023, 16:15 PM
Last Post: gcs190
YTMercedes Fix for XENTRY Pass Thru Communication Error 99.58642.0 crypt0ninja 2 994 08-09-2023, 09:01 AM
Last Post: crypt0ninja
  Solved ✔ sd connect error 801 fix viki300 5 693 11-08-2023, 15:59 PM
Last Post: viki300
  Error crd3.30 After flash New sw abdonete 2 312 20-07-2023, 16:02 PM
Last Post: gcs190

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content