[mikeypx82]

I have an '10 E82 with factory navigation. I tried to update my ZBE controller in WinKFP and it stopped working after I flashed it. When I flash the module it completes 100%, then I get this error message:

Error 211
Code     Level     Module                 Procedure           Index    Text
2086       PABD     ZBE2                    PruefeSignatur   2493   Signature check failed 11FLASH,
NG_SIGNATUR_PRUEFEN (Programm)     
ERROR_FLASH_SIGNATURE_CHECK        
2086       Error      COAPI2.CPP       coapiRunCabd       6       Signature check failed SG_PROGRAMMIEREN
2086       Error      COAPIKF.CPP     coapiKfProgSgD2 19      Signature check failed
 
I’m using the latest daten files from ISTA-P 3.66 with k+dcan cable and 15A battery charger. I was able to flash my Combox, PDC, and DWA (these were retrofits) without a problem, but the ZBE keeps giving me the same error. I tried programming the ZBE in ISTA-P and I got the same error message. The ZBE shows up in INPA UIF with job status “OKAY”. Any ideas on how to get ZBE working again?