[TAISHO6666]

Hi every body
Using tms374 ecu decoding to decode sagem SL96-3
The manual of the TMS374 ECU DECODER say
Pin 1 ---------12v+
Pin 2\3\18 ----------GND
Pin 27\48 immo data line ( cut )

When applying this connection, there is a short between these pins
I guss this pin connection is wrong, can any body help me with the right pin connection
When checking autodata for sagem SL96 ECU PIN OUT
PIN 13/35 ----------12V+
PIN 36/54 --------GND
Or I can cut pin 27\48 then fit ecu in the car and open ignition and start decoding process

Thanks for cooperation and assistance