[alexnaoumov]

Hey friends,

I have bought used evo that is messed up. It has SDARS in the Adjustblock but physically has DAB and that kind of stuff. Also wrong DVD player in the adjustblock and probably that's why I can't flash 271a on it.

I dont care a lot if I break it at this point, main goal is that I want to try to change adjustblock, learn from it and run the patch for black screen after that.

However I dont succeed doing this at this point because it says invalid ID.. Who can tell me what the right syntax is for the seta command?

Code:

hu-omap:/dev/shmem> sysetshellevo --connect

#HW: nbt
#CONNECTED
#STATE: FullyOperable

syset:>geta E2P.ProdLogistic.HWCoding.DMB
 NAME: E2P.ProdLogistic.HWCoding.DMB
 TYPE: UInt8
   ID: 0x80150001
MODIF: OK
 SIZE: 0x01
VALUE: 0x00

syset:>seta E2P.ProdLogistic.HWCoding.DMB=0x04
#SET RESULT: Invalid id

syset:>seta E2P.ProdLogistic.HWCoding.DMB=04
#SET RESULT: Invalid id

syset:>seta E2P.ProdLogistic.HWCoding.DMB 0x04
#SET RESULT: Invalid id

syset:>seta 0x80150001=0x04
#SET RESULT: Invalid id

syset:>

I added the current adjustblock as text dump in attachments. As you can see it's completely wrong because this is European HW 4.1 with DAB, also proddate is in 2018 and not in 2015..