[Netocassion]

Hello everyone,

Have the following case:

Due to the malfuntion of gestures recognition camera in original FZD module replaced it with the module from another car. 

Managed to inject the workable CAFD files to it so it was fully functional and codable for quite a while. 

After that, decided to update it, and this is the moment when everything was messed up. 

At the moment the ECU is Blue in Ista / not responding / invalid SVK.
For the Flashing the error code is: Repeat Job

Example below:

---

Caf's suchen

Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
ExecutionID=2022/11/04-00:33:48.043
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[FZD2 - 56] prepareECUforCoding started [PROGRESS]
MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=FZD2_56_ETHERNET> [DIAGSERVICE]
[FZD2 - 56] prepareECUforCoding error [PROGRESS]
[] Exception occurred: job failed with negative response error: 
 code: service returned global negative response
 description: Service DSC returned a negative response with response code subFunctionNotSupported; LinkName: FZD2_56_ETHERNET
 severity: ERROR

Timestamp: Fri Nov 04 00:33:53 MSK 2022
 ID: 433
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=TAL, ecuid=(FZD2,0x56), TA_CATEGORY=cdDeploy, PROGRAMMING_STATUS=prepareECUforCoding,PSdZEvent={message=MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=FZD2_56_ETHERNET>, timestamp=Fri Nov 04 00:33:52 MSK 2022, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__, event id=default, event type=DiagService error, ECUId:FZD2_0x56}} [THROWABLE]
[FZD2 - 56] There was an error during TAL execution, please check the log files. [WARN]
[FZD2 - 56] - [Exception - FZD2 - 56] Exception occurred: job failed with negative response error: 
 code: service returned global negative response
 description: Service DSC returned a negative response with response code subFunctionNotSupported; LinkName: FZD2_56_ETHERNET
 severity: ERROR

Timestamp: Fri Nov 04 00:33:53 MSK 2022
 ID: 433
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=TAL, ecuid=(FZD2,0x56), TA_CATEGORY=cdDeploy, PROGRAMMING_STATUS=prepareECUforCoding,PSdZEvent={message=MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=FZD2_56_ETHERNET>, timestamp=Fri Nov 04 00:33:52 MSK 2022, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__, event id=default, event type=DiagService error, ECUId:FZD2_0x56}}
[FZD2 - 56] finalizeECUCoding started [PROGRESS]
MCDDiagService<id=12618, job=com.bmw.psdz.jobs.uds.MCD3_FinalizeECUCoding, service=ER - EcuReset, description=error: negative response : subFunctionNotSupported, link=FZD2_56_ETHERNET> [DIAGSERVICE]
[FZD2 - 56] finalizeECUCoding error [PROGRESS]
[] job failed with negative response error: 
 code: service returned global negative response
 description: Service ER returned a negative response with response code subFunctionNotSupported; LinkName: FZD2_56_ETHERNET
 severity: ERROR
 [THROWABLE]
[FZD2 - 56] There was an error during TAL execution, please check the log files. [WARN]
[FZD2 - 56] - [Exception - FZD2 - 56] job failed with negative response error: 
 code: service returned global negative response
 description: Service ER returned a negative response with response code subFunctionNotSupported; LinkName: FZD2_56_ETHERNET

---

Car - G30 
I step (sh.) S15A-17-07-502
I step (cur.) S15A-20-11-557

Spare module FZD is from G20??? Short vin inside I know is AK11569 (I suppose it is important to have my VIN written to the ECU but i have no known/available solution yet to perform this)

When i was preparing for flashing this single module, i took my initial I-step (which is propably wrong to take for this module while prod date of it is 08.05.17 which is close tj tje production of the original ECU) and with it the HW-ID from SVTactual was showing all HWEL files to be black. Target I-step for it was S15A-22-03-571.

The goal of mine is to make everything the way it was before unsuccesfull flash and forget about updating this ECU. Assume there is no more easy way to restore everything back.

Would appreaciate any help and advice as i'm an absolute-absolute beginner.
E-Sys 3.38.2 
Data 4.37.11
E-net cable
Launcher Pro