Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
galaxy 1.8tdci ecu problem
|
29-11-2022, 19:06 PM,
Post: #1
|
|||
|
|||
galaxy 1.8tdci ecu problem
Hello
I have a problem with a galaxy mk2 1.8tdci 100ps. The car runs very badly, smokes, has no power. Injectors checked, timing checked, compression checked, turbo checked - preventively regenerated. After starting, the car behaves as if it were burning the DPF, the speed is 950, the fan is on 1st gear, it heats the rear window - not always. When accelerating, it smokes black very much (this car never had dpf). The ECU was replaced (I think, described with a felt-tip pen). Can someone confirm the correctness of the installed ECU using the VIN number? This is how PCMFLASH identifies it: Interface: Scanmatik - SM2 USB DLL: 1.0.0.15 (built 12.02.19) Firmware: FW:0808 HW:02 SN:A55259 Protocol: Ford Mondeo 4: 1.8L Lynx, 2.0L DW10C STAGE 4 (SID206) Identification VIN: WF0MXXGBWM8C24912 SW Version: 7G91-12K532-MG Serial number: 000285107758 Part Number: 7G91-12A650-RG Hardware: 6G91-12B684-DA Calibration file: 10139621AA 10139643AA 10121708AA 7G91-14C275-AA CVN: CB6B4DC6-334A82AD Completed Below is the flash read from this ECU. Could someone put the original (correct) flash for this car? greetings and thank you very much. |
