[brolism]

Hello, maybe someone retrofited and coded wireless charging for Passat B8 Facelift? 
Ive bought charger 5NA980611 and wiring harness. Installed it. But i have few problems: 
First is that it charges 10 sec and then disconnects. (maybe used charger is bad)
Second that i cant find correct adaptations on 5F (MIB3) and it does not show when charging. (No coding like in MIB2.5)



MIB3  Part No SW: 3G5 035 820 F  

Adaptations what ive found related to wireless charging (changed some to active)
IDE04300-ENG152500-Vehicle menu operation-menu_wireless_charging
activated

IDE04300-ENG152504-Vehicle menu operation-menu_wireless_charging_after_disclaimer
activated
IDE04300-ENG152501-Vehicle menu operation-menu_wireless_charging_clamp_15_off
not activated
IDE04300-ENG152502-Vehicle menu operation-menu_wireless_charging_over_threshold_high
not activated
IDE04300-ENG152503-Vehicle menu operation-menu_wireless_charging_standstill
activated 
IDE04307-ENG142160-Vehicle function list BAP-wireless_charging_0x48
activated
IDE04307-ENG142161-Vehicle function list BAP-wireless_charging_0x48_msg_bus
not activated  (NOT activated because has a lot parameters, dont know what to activate)
ENG248434-ENG248718-function_configuration_phone-interlink_box_wireless_charging
installed



Wiring:
- pin 1: Power. 0,5mm red/blue to fusebox

- pin 2: Power on signal from infotainment unit. 0,5mm yellow/red to grey connector on infotainment unit pin 5

- pin 3: Data/LIN bus from infotainment unit. 0,5mm yellow/blue to grey connector on infotainment unit pin 11

- pin 4: Ground. 0,5mm brown to ground 
- pin 5: 0,5mm white to 73-pin plug C pin 14 on BCM