Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Touran EDC17C46 in limp mode. DPF+AdBlue Delete
|
30-08-2023, 18:32 PM,
(This post was last modified: 30-08-2023, 18:46 PM by anass_f.)
Post: #1
|
|||
|
|||
Touran EDC17C46 in limp mode. DPF+AdBlue Delete
Hi mates,
I have here a Touran on which I tried ECUDECODER and Davinci and a service of a tuner but without success. I deleted the AdBlue and the DPF. I physically removed the DPF and the AdBlue ECU + NOx sensor. The car is still in limp mode with no DTC except for a glow plug. After flashing those three flash mods when I pull the measurements blocs I see the DPF measured and calculated masses are both: 60g (which is high). I also see the engine torque value is limited by "smoke torque limitation" value while driving. I reset the DPF values with the original flash and then flashed the mods, but still no joy. If someone can please help with this car. Thank you in advance. I think I might have found the culprit. The DPF diff sensor shows a very high value and I tested it with a handheld tool and it confirms the reading. This means the exhaust pipe is clogged somewhere. Probably in the back silencer because I have physically removed the DPF. I'll keep the thread updated once I confirm the findings. |
