[BMWFXX]

Hi guys,

Someone has reportedly deleted the crash data from an airbag module for a 2017 VW Golf 7 (5Q0 959 655 AA) in which a crash was stored.
Now we want to do a flash update with Odis Engineering because the airbag module comes from another car.
When updating the flash we see that "Crash counter is not zero"

My question is if anyone can check whether the crash has been removed from flash or not.

I am sending the original file with the crash and the modified file that says the crash has already been removed.

Can someone remove the crash for me if necessary?

Or is there a way to remove the crash with VCDS or VCP?

Is a specific login code required to be able to change something with VCDS in the Adaption menu?
Because I tried to perform Calibration data: pre-crash in Adaption, but that didn't work because a code had to be entered, but unfortunately I don't know the code to be able to change anything in adatpion.

The faults that are constantly stored and cannot delete,

                Address 15: Airbags      Labels: 5Q0-959-655.clb
Control Module Part Number: 5Q0 959 655 AA    HW: 5Q0 959 655 AA
  Component and/or Version: AirbagVW20    014 0386
          Software Coding: 98CCC000000000005C0000CF004800000065
            Work Shop Code: WSC 01357 011 00200
              ASAM Dataset: EV_AirbaVW20SMEVW37X 002130 (VW37)
                      ROD: EV_AirbaVW20SMEVW37X_VW37.rod
                      VCID: 7F072305E6D14069BA-802A
4 Faults Found:

9454080 - Safety belt switch 2nd row driver side
          B1042 00 [10001001] - -
          
9454592 - Safety belt switch 2nd row passenger side
          B1044 00 [10001001] - -

9454336 - Safety belt switch 2nd row center
          B1043 00 [10001001] - -
          MIL ON - Confirmed - Tested Since Memory Clear
            Freeze Frame:
          
10487296 - Control Module Does Not Match Vehicle
          B2006 00 [10001001] - -
          

Thanks!