Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CIC Status 12
17-05-2016, 01:42 AM,
Post: #11
|
|||
|
|||
RE: CIC Status 12
Hi,
Is it CIC or CIC_MID (Motion version) Give me acces teamviewer i will flash it for you and all be ok. |
|||
17-05-2016, 09:01 AM,
Post: #12
|
|||
|
|||
RE: CIC Status 12
Today I connected the DVD drive and then try to make update but no chance. It goes up to 100% and then it aborts with error.
Here some place a signature instead of testing and it fails. It can be like someone watch the whole. Unfortunately, I'm from Germany and I speak German. But ever thank you for your help. |
|||
17-05-2016, 10:19 AM,
(This post was last modified: 17-05-2016, 10:25 AM by DJ_B4L.)
Post: #13
|
|||
|
|||
CIC Status 12
My brother have one problem with his cic that he is flashing
It updated on all three ecus and says programming ok but its still stuck in boot loader mode i think As fan is running on full and black screen which is normally when you are updating Gw Under inpa all ecus show ok none show 255.255 normally when ecu is not programmed properly Under which ecu can you see status 12 in toolset and under which menu |
|||
17-05-2016, 10:41 AM,
Post: #14
|
|||
|
|||
RE: CIC Status 12
So I DVD drive is connected and again made ZB update and the address 63 ran through and the fan is still running. Then the 62 flashed and then the fan went out.
|
|||
17-05-2016, 11:30 AM,
Post: #15
|
|||
|
|||
CIC Status 12
So seems you now have similar problem to my brother cic with black screen?
On mine fan is running Yours is showing flashing went all ok on inpa from that picture Did you flash last one A0? Or make reboot to cic to see it bmw logo comes back on screen |
|||
17-05-2016, 12:41 PM,
Post: #16
|
|||
|
|||
RE: CIC Status 12
I'm building it now times in a X5 and tests it.
I would like also to thank for the help here. And if someone problems with CIC then I can also help you. |
|||
17-05-2016, 13:25 PM,
(This post was last modified: 17-05-2016, 13:29 PM by DJ_B4L.)
Post: #17
|
|||
|
|||
CIC Status 12
I need some one to help me get mine back up and running
Its stuck on black screen with fan running on full Tried flashing v41 or v55 same problem takes update on all 3 Ecus it sayd programming ok but stuck on black screen always Here is a picture of the unit checked on toolset i compare with another cic this one says aif address low =51 on a working cic this is 0 Here is the working system same version firmware both dab cic e90 |
|||
17-05-2016, 22:18 PM,
Post: #18
|
|||
|
|||
RE: CIC Status 12
When not let me look with teamviewer i cannot give any help
When its in Boot status normally always get the machine up and running i flashed over a thousand times cic |
|||
17-05-2016, 22:21 PM,
Post: #19
|
|||
|
|||
CIC Status 12
I may get you to look at mine see if you can bring it to life
Im away for one week when back il let you help |
|||
17-05-2016, 23:26 PM,
Post: #20
|
|||
|
|||
RE: CIC Status 12
Ok no problem mate
enjoy week off |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content