[mpautoservis]

Friends.

Does anyone have the english version 31223c with firmear 1.59, that may have worked with Chinese older clone, with a regular chip.
It remains to be tested.

Regards

[mattydr67]

Do you wanna say opcom 131223c that works with any clone?
Not softwares for HQ clones maybe you try yo find?
Maybe as the vauxcom120309a that was shared here.
???????
Good luck

[obdstart]

Friends.

Does anyone have the english version 31223c with firmear 1.59, that may have worked with Chinese older clone, with a regular chip.
It remains to be tested.

Regards

My advice: dont try because you f..k chinese interface, especially with a fake chip... so choice is yours..

[al 150 cdti]

Vaux-com 120309a modified I have If that's any help

[mattydr67]

I belive he needs opcom 131223c made like the vauxcom that you have
This softwares works with any no moded clones
As Mr obdstar said the softwares for HQ clones not working with nomoded clones and you can damage item too
Good luck

[obdstart]

Vaux-com 120309a modified I have If that's any help

Already uploaded here:
http://garage-automotive.com/showthread.php?tid=4429

[ruffles1986]

Where i can buy a HQ clone?? (Not usually china clon 2010)

[McMihai]

@McMihai - may you tell us what Astra G you tested please
I wanna do some tests in same car and I will review here
Good luck

is Astra G 2004 CDTI, 59Kw,Z17DTL

[mattydr67]

@McMihai
This car I tested allready few mounths ago without problem using op-com 131223c english version.
Tool has fw1.60 ( I didn't need to downgrade it to fw1.59 ). But with VAUX-COM I had issues to connect to one of the controlers. ( i don;t remember now in which one but i will be able to find one car like that one again too ) In the rest i had no problem in any car that I tested.
recentlly ( or usually ) my tests cars are: Corsa C, Vectra B, Omega B, Astra G, Insignia and from time to time Vectra C
I had not problem anymore in not one of this cars using VAUX-COM 131223d and firmware 1.60

@ruffles1986 - mate you can find in this forum in Market Place or to the resselers from you country (maybe) - in other forums in Selling Place too or using google
Good luck

[McMihai]

of Mattydr67 for @McMihai

Try like this and report please
Downgrade your firmware in your HQ clone to the fw 139 using OCflash
Then install opcom 121231h or opcom121231i ( english version )
Then plug the tool to the USB and try to connect to a car ( the tool not connected to a car )
The software will upgrade the firmware in yiur interface to the fw 1.47 or 1.59 ( I don't know now but I can check later to be sure ) and then try in that Astra G.
You'll see that it will works like a charm.
@titon - when you mean old you mean the date - 2007 (on mine it is write 2014 ) or you're talking about Revision B hardware ( because $I mentioned above there's no other harware sold by chinese )
JFI - the opcom hardwares are made in china but moding and softwares or this solution it wasn't sold in china anymore.
Good luck


[/quote]





with a little help from a great person.
  I followed your advice done as you said and used the version 121231h with FW1.47
in the same car (astra G) WORKS PERFECTLY
I appreciate all the information provided by Mr. Mattydr67