[Haug530d]

You sure your CAS has PROPER FA???

Pretty sure, but once again this is a used car i bought so can't be 100% sure, is there a way to check if its the proper one?

BTW, before i coded the FRM module the power window on the driver side wouldnt go up or down either, but the buttons in the door was reversed, now they are the right way, so at least i'm sure the Power window panel is working.

[BmwMerc]

You sure your CAS has PROPER FA???

Pretty sure, but once again this is a used car i bought so can't be 100% sure, is there a way to check if its the proper one?

BTW, before i coded the FRM module the power window on the driver side wouldnt go up or down either, but the buttons in the door was reversed, now they are the right way, so at least i'm sure the Power window panel is working.

Check your VO against your VIN number using VIN decoder and compare it with the actual VO in your CAS simple as that.
If VO is the same the only thing you have to do is transfer it into FRM using NCSexpert and do default coding on the FRM. Thats it.
If there is VO mismatch edit it using the same NCSexpert save it and again follow the steps above.
There are plenty of info and manuals how to use NCSexpert don`t be lazy to do a bit of research.

[SeqRT]

Check that the VO configuration of your car is correct in CAS, if correct, then go to FRM and encode by factory (default).
To do this, clear the file completely "FSW_PSW.MAN" ("C:\NCSEXPER\WORK ") and with an empty file, execute SG_CODIREN

[Haug530d]

You sure your CAS has PROPER FA???

Pretty sure, but once again this is a used car i bought so can't be 100% sure, is there a way to check if its the proper one?

BTW, before i coded the FRM module the power window on the driver side wouldnt go up or down either, but the buttons in the door was reversed, now they are the right way, so at least i'm sure the Power window panel is working.

Check your VO against your VIN number using VIN decoder and compare it with the actual VO in your CAS simple as that.
If VO is the same the only thing you have to do is transfer it into FRM using NCSexpert and do default coding on the FRM. Thats it.
If there is VO mismatch edit it using the same NCSexpert save it and again follow the steps above.
There are plenty of info and manuals how to use NCSexpert don`t be lazy to do a bit of research.

Yes, but now you are telling me something i already know, the CAS has the same VIN number as my car, so the VO should be correct i guess.


Thenever i press the driver side window there is a weak sound comming from a relay, if i press the passenger side the relay sound is more noticeable.

My conclusion is that the button panel is workig and also the FRM module, but something else is not working, either a relay or the driver side power motor for the window.

[BmwMerc]

You sure your CAS has PROPER FA???

Pretty sure, but once again this is a used car i bought so can't be 100% sure, is there a way to check if its the proper one?

BTW, before i coded the FRM module the power window on the driver side wouldnt go up or down either, but the buttons in the door was reversed, now they are the right way, so at least i'm sure the Power window panel is working.

Check your VO against your VIN number using VIN decoder and compare it with the actual VO in your CAS simple as that.
If VO is the same the only thing you have to do is transfer it into FRM using NCSexpert and do default coding on the FRM. Thats it.
If there is VO mismatch edit it using the same NCSexpert save it and again follow the steps above.
There are plenty of info and manuals how to use NCSexpert don`t be lazy to do a bit of research.

Yes, but now you are telling me something i already know, the CAS has the same VIN number as my car, so the VO should be correct i guess.


Thenever i press the driver side window there is a weak sound comming from a relay, if i press the passenger side the relay sound is more noticeable.

My conclusion is that the button panel is workig and also the FRM module, but something else is not working, either a relay or the driver side power motor for the window.

when you say "the VO should be correct I guess" you sound not very convinced thats why I offered to compare your VOs with factory one. Thats all.

just remove the panels and check the power motor if its still ok if you have any doubts if no check the wirings too.

[Haug530d]

You sure your CAS has PROPER FA???

Pretty sure, but once again this is a used car i bought so can't be 100% sure, is there a way to check if its the proper one?

BTW, before i coded the FRM module the power window on the driver side wouldnt go up or down either, but the buttons in the door was reversed, now they are the right way, so at least i'm sure the Power window panel is working.

Check your VO against your VIN number using VIN decoder and compare it with the actual VO in your CAS simple as that.
If VO is the same the only thing you have to do is transfer it into FRM using NCSexpert and do default coding on the FRM. Thats it.
If there is VO mismatch edit it using the same NCSexpert save it and again follow the steps above.
There are plenty of info and manuals how to use NCSexpert don`t be lazy to do a bit of research.

Yes, but now you are telling me something i already know, the CAS has the same VIN number as my car, so the VO should be correct i guess.


Thenever i press the driver side window there is a weak sound comming from a relay, if i press the passenger side the relay sound is more noticeable.

My conclusion is that the button panel is workig and also the FRM module, but something else is not working, either a relay or the driver side power motor for the window.

when you say "the VO should be correct I guess" you sound not very convinced thats why I offered to compare your VOs with factory one. Thats all.

just remove the panels and check the power motor if its still ok if you have any doubts if no check the wirings too.

I will check the motor, thanks

[jaramillo]

Yes, but now you are telling me something i already know, the CAS has the same VIN number as my car, so the VO should be correct i guess.


Thenever i press the driver side window there is a weak sound comming from a relay, if i press the passenger side the relay sound is more noticeable.

My conclusion is that the button panel is workig and also the FRM module, but something else is not working, either a relay or the driver side power motor for the window.

You are saying already know, but seems you dont understand the concept.. even if you have same vin at cas, it does not mean your VO is correct...you can have an incorrect vo at cas...all options could match to your car equipment, but if you have an incorrect build date or car type the results in terms of coding could be really different...
Post your vin and someone will generate a ssd file to be sure all is correct

[Haug530d]

Yes, but now you are telling me something i already know, the CAS has the same VIN number as my car, so the VO should be correct i guess.


Thenever i press the driver side window there is a weak sound comming from a relay, if i press the passenger side the relay sound is more noticeable.

My conclusion is that the button panel is workig and also the FRM module, but something else is not working, either a relay or the driver side power motor for the window.

You are saying already know, but seems you dont understand the concept.. even if you have same vin at cas, it does not mean your VO is correct...you can have an incorrect vo at cas...all options could match to your car equipment, but if you have an incorrect build date or car type the results in terms of coding could be really different...
Post your vin and someone will generate a ssd file to be sure all is correct

Ok here is my vin

WBAUE31050E180112

[____ANGEL___]

PAINT 0A52
POLSTER EAAT
I STEP SHIP. E89X-08-09-530
TYPEKEY UE31
STEERING LEFT

01CB
0411
04AK
0548
0851
01CA
01CC
01CD
0320
0423
0428
0473
0493
0520
0534
0698
07RP
0801
0863
0879

[jaramillo]

WBAUE31050E180112

Here you can find the file
Remove txt