[Wesk18]

Hello,

Does someone know how to change the ilevel with tool32, i have an a weird version (E89x-05-09-530), (E89X-21-09-432) it won't let me run ista/p.
thanks

[Sabreace]

First Picture :

Vin from CAS and FRM missmatch because they are different

Second Picture

I think your I-Stufe is not write to car

Regards
Sab

[leo04]

You need to change your I-Stufe in CAS

[Wesk18]

First Picture :

Vin from CAS and FRM missmatch because they are different

Second Picture

I think your I-Stufe is not write to car

Regards
Sab

can this missmatch be fix with winkfp? if so how?

---

You need to change your I-Stufe in CAS

How do i change my i-level in cas? do i use winkfp?

[KEEEN]

You need check vin in FRM with tool32 and change if necessary.

[Wesk18]

You need check vin in FRM with tool32 and change if necessary.

so open frm.prg then double click on which command?

[KEEEN]

Choose correct FRM in your case and then c_fg_lesen for FRM and CAS.
To change vin : C_fg_shreiben and C_fg_auftrag but you can not change vin in CAS

[Wesk18]

Choose correct FRM in your case and then c_fg_lesen for FRM and CAS.
To change vin : C_fg_shreiben and C_fg_auftrag but you can not change vin in CAS

thanks, I think I got it fixed but will check again today, I used winfkp to update FRM with my vin then ran ista/p and it didn't gave me the vin error just the I-level error.

Are you familiar with winfkp and doing updates on the modules, if so after updating certain modules like for example klima, does running ncsexpert and executing "SG-CODIEREN" to set to factory settings does this means re-encoding/calibrating? I wasn't sure if I was doing it correctly but after updating Klima my ac stopped working then doing "SG-CODIEREN" fixed it.

[Wesk18]

First Picture :

Vin from CAS and FRM missmatch because they are different

Second Picture

I think your I-Stufe is not write to car

Regards
Sab

Do you know how to write correct i-stufe using toolset32?

[ruben_17non]

Open E89.prg and check istuffe lesen and write