[ctuna]

This is not much help but mine printed right away I just pushed the print icon
at the top of the page. Does it give you any errors ?
I use a a printer on my home network.

[ctuna]

Another dumb question
ista D is strictly diags ?
I believe dis 57 could register battery's .
Do you need istap to register battery's or code injectors ?
I know you can do it from inpa and tool 32.

[KaiO]

ISTA can do rhis as well

[per4mer]

Another dumb question
ista D is strictly diags ?
I believe dis 57 could register battery's .
Do you need istap to register battery's or code injectors ?
I know you can do it from inpa and tool 32.

Code injectors - yes
Register battery - yes, if you replace it with one with the same capacity (Ah) you may "tell" your car that the battery is new.
If you decide to put a larger or smaller one (in terms of capacity not dimensions ) you'll need ISTA P.

It's not strictly diags, there are many adaptations you may need to perform like: increase starting injection quantity, correct parameters for an aged MAF sensor, adapt steering angle....an so on...

And above all, it's very friendly...my opinion.

[ctuna]

I found an exmaple of battery registration with ista online
thanks .
Doesn't the car perform adaptions automatically?
where are these adaption procedures?

Thanks in advance for any reply's

[cryptocar]

The adaptations are spread out in the documentation. For example brake bleeding there are 2 guides for the F30 one is just the guide the other has the guide and a button to run the ABS pump. The same goes for steering etc.


Sent from my iPhone using Tapatalk

[per4mer]

I found an exmaple of battery registration with ista online
thanks .
Doesn't the car perform adaptions automatically?
where are these adaption procedures?

Thanks in advance for any reply's

Vehicle management -> Service function -> Body -> Voltage supply -> Battery -> Register battery replacement.
The procedure is assisted and explained within software.

This is an example for E60/530i/2004. It might differ for other models.

"Doesn't the car perform adaptions automatically?" - No, it doesn't......you have to do it yourself in this case (battery replacement). If you don't, you might encounter charging problems, shortage in battery life and so on.

Good luck !

[Sii770i7]

Need help here! Is there some setting which I had missing out? Some vehicle info not displayed correctly and on top right, KL15/30 SHOULD there be some readings? Sorry, I'm really very need to Rheingold. I'm trying to calibrate my rear view camera which is showing failure error. Unable to calibrate as I assume it might due to some setting not done properly. Btw, when I did vehicle test without engine running plus I don't have a charger. Hope someone can provide me some directions.. Before screenshot for your reference and dirty for the poor Image.

[NeRkO20]

Kl15/30 only with ICOM.

.:: Sent from Galaxy S6 Edge ::.

[Sii770i7]

Kl15/30 only with ICOM.

.:: Sent from Galaxy S6 Edge ::.

Well noted but do you have any ideal why some of the vehicle infos not appearing and with small error icon?