[bm_tech]

Can anyone help install on team viewer, willing to give beer tokens haha

[Spirit5676]

Does with version include tests likes Vanos test? I couldn't find it for s62 (e39 m5). I assume it should be found under service functions?

[sang]

Hi everyone
after i install ISTA D, i have a error pls help me

[bm_tech]

Just tried to print out the diagnostic protocol and I have nothing there. Any help??

Thanks

[lagunasec]

Look for it in Rheingold/Print folder.

[einmalacht]

Hello Friends,

is it planed to update the easy ready to use Version of this thread to the current version of PZdata and Rheingold ?

I like this standalone Versions!

Greetz from Germany

[mo328i]

Hello and thanks for the upload! I have a question please. I recently bought ICOM NEXT header and set a static IP to the module ->169.254.92.100 (dhcp disabled). I want to know what is the configuration for the the Rheingold so i can see the ICOM? Do i have to set back to dhcp (as it was before) with subnet mask 255.255.0.0 and put the VCI_config to -HO-ICOM/ENET local und ISIS Network- ?? ,or leave it like this and configure the ediabas.ini file and choose to VCI_config -Ediabas standar settings (ediabas.ini)-?? The indtallation is done in a VM Machine but i am confused about the ip configuration that i have to do so i can work with Ista-p and Ista-d, THANKS!!!!

       

[maximillen]

Torrent is not working give socket error

any solutions?

thanks..

[spider80]

Torrent is not working give socket error

any solutions?

thanks..

All working good !!!

---

Hello and thanks for the upload! I have a question please. I recently bought ICOM NEXT header and set a static IP to the module ->169.254.92.100 (dhcp disabled). I want to know what is the configuration for the the Rheingold so i can see the ICOM? Do i have to set back to dhcp (as it was before) with subnet mask 255.255.0.0 and put the VCI_config to -HO-ICOM/ENET local und ISIS Network- ?? ,or leave it like this and configure the ediabas.ini file and choose to VCI_config -Ediabas standar settings (ediabas.ini)-?? The indtallation is done in a VM Machine but i am confused about the ip configuration that i have to do so i can work with Ista-p and Ista-d, THANKS!!!!

Try to use HO-ICOM/ENET local network or HO-ICOM/ENET direct connection and with subnet mask 255.255.0.0.
Ediabas for ICOM don't needed !!!

---

Hello Friends,

is it planed to update the easy ready to use Version of this thread to the current version of PZdata and Rheingold ?

I like this standalone Versions!

Greetz from Germany

No. But I'm going to make the next versions. Or i can make only ISTA-P 3.58.3.003, on torrent, all others u can find on forum.

[mo328i]

While ista-d is working correctlly with configuration :

VCI_config : HO-ICOM/ENET local und ISIS Network
PC local ip (inside VM)(static): 169.254.214.100, subnet 255.255.255.0, GW 169.254.214.1
ICOM NEXT IP: 169.254.214.142 (static), subnet 255.255.255.0
The VM is in bridged mode (only the ethernet now the wifi adapter).
I can see the header with itools radar.

So all good with ista/d BUTista/p cannot see the ICOM NEXT.. is there any configuration to do in any file? Or is there any particular configuration that i need to follow ?? Thans!!!!!!

---

While ista-d is working correctlly with configuration :

VCI_config : HO-ICOM/ENET local und ISIS Network
PC local ip (inside VM)(static): 169.254.214.100, subnet 255.255.255.0, GW 169.254.214.1
ICOM NEXT IP: 169.254.214.142 (static), subnet 255.255.255.0
The VM is in bridged mode (only the ethernet now the wifi adapter).
I can see the header with itools radar.

So all good with ista/d BUTista/p cannot see the ICOM NEXT.. is there any configuration to do in any file? Or is there any particular configuration that i need to follow ?? Thans!!!!!!

By the way tried with icom a2 (firmware3.13) and ista/p worked... If i burn this firmware to icom next (current firmware 03.14.05) will i have a problem???