Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to install elm 327 drivers to make it work with multiecuscan
23-03-2017, 11:22 AM,
Post: #1
|
|||
|
|||
How to install elm 327 drivers to make it work with multiecuscan
Hello, i have problem with the drivers for elm 327
as u can see form the sceenshots below http://prntscr.com/enawri http://prntscr.com/enawve http://prntscr.com/enawzg this is from multi ecu scan http://prntscr.com/enaxb1 i was stick with this tutorial how to instal the drivers on win 10 can someone help me? |
|||
23-03-2017, 14:59 PM,
Post: #2
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
Which version is?
|
|||
23-03-2017, 15:34 PM,
Post: #3
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
Try to use ftdi official drivers.
|
|||
23-03-2017, 16:19 PM,
(This post was last modified: 23-03-2017, 16:48 PM by laguna.)
Post: #4
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
(23-03-2017, 11:22 AM)laguna Wrote: Hello, i have problem with the drivers for elm 327 elm 327 1.5a (23-03-2017, 15:34 PM)ljscodex Wrote: Try to use ftdi official drivers. i tired already... this is the problem... is it driver related? |
|||
23-03-2017, 19:35 PM,
Post: #5
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
Use these:
http://www.ftdichip.com/Drivers/VCP.htm Set them as in the user guide: http://www.multiecuscan.net/HowToUse.aspx "Latency timer set 1" in advanced settings Good luck |
|||
23-03-2017, 21:00 PM,
Post: #6
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
(23-03-2017, 19:35 PM)ewox Wrote: Use these: i will try tommorow with latency set on 1... http://prntscr.com/enobh1 like described here maybe with this will make it work, i think now the driver is ok http://prntscr.com/enobxz |
|||
24-03-2017, 05:34 AM,
(This post was last modified: 24-03-2017, 05:48 AM by mattydr67.)
Post: #7
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
Latency must be 16 ( default )
Latency set to 1 or better to 2 is for vagcom blue one kkl interface But as I can see your tool it has Prolific chip not FTDI one So go use the Prolific drivers for win10 I suppose that your problems hasn't relation of drivers. Because your tools is seen in Multiecuscan and you can do a TEST Well your test show you an issue. But if I am not wrong the problems is the resistor (120) soldered between MCP2551 pins 6 and 7 You have to remove it. Try it Good luck |
|||
24-03-2017, 05:56 AM,
Post: #8
|
|||
|
|||
How to install elm 327 drivers to make it work with multiecuscan
Alright i will remove it and see whats will change
Sent from my iPhone using Tapatalk |
|||
24-03-2017, 12:38 PM,
Post: #9
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
Anyway i tried with the elm327 and scanmaster elm on hyndai getz and it worked only read error codes...
so the driver is ok... but on mine car fiat punto hgt doesnt work... |
|||
24-03-2017, 14:07 PM,
(This post was last modified: 08-01-2019, 23:23 PM by mattydr67.)
Post: #10
|
|||
|
|||
RE: How to install elm 327 drivers to make it work with multiecuscan
Mate for Fiat Group car that resistor must not be there. Thats why you cannot connect to your car ( if its CAN BUS one )
You have to know ( becuse you don't mention what car do you have ) that to connect in some controlers on k-line you need vagcom kkl but no ELM327 For othet cars you do not need to remive that resistor. ElM327 chinese clones are diffrent then real schematic on CAN BUS and this creat that issue in Fiat Group cars Good luck |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Multiecuscan v4.9 | matrix1340 | 19 | 6,839 |
17-02-2024, 12:25 PM Last Post: djwwragg |
|
MultiEcuScan 5.0 | drjeep | 17 | 4,361 |
09-12-2023, 17:44 PM Last Post: yomgui |
|
MultiEcuScan 4.6 - 4.7 - 4.8 | fantomel | 21 | 24,492 |
06-07-2023, 12:18 PM Last Post: blerim shehi |
|
Multiecuscan 4.2 Full REGISTERED | venix | 26 | 9,708 |
11-08-2022, 11:25 AM Last Post: boby1979 |
|
MultiEcuScan not work with FIAT DUCATO 250 | anci.pl | 2 | 1,379 |
19-05-2022, 13:42 PM Last Post: svmipmf |
|
Solved ✔ MultiEcuScan + OBDLink | Liteace | 11 | 2,872 |
27-02-2022, 19:12 PM Last Post: Liteace |
|
Fiat Multiecuscan 3.9R1 + FIX | blokers77 | 11 | 19,182 |
06-07-2019, 12:26 PM Last Post: Lordmetro |
|
Multiecuscan 4.0 Full REGISTERED | karabulut588 | 41 | 64,799 |
22-04-2019, 17:58 PM Last Post: VAG |
|
Fiat Multiecuscan v3.8 Full Registered | obdstart | 16 | 26,718 |
19-04-2019, 07:37 AM Last Post: Manigoldo |
|
Fiat MultiEcuScan 4.2 | Twoone | 16 | 16,800 |
19-01-2019, 10:11 AM Last Post: ToMiBoY |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content