Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E39 MS41.0 EWS ISN or IMMO Off
27-06-2017, 08:02 AM,
Post: #1
|
|||
|
|||
E39 MS41.0 EWS ISN or IMMO Off
Heya all
Another BMW issue. I have a 1998 BMW E39 525 which the EWS & key has been replaced. (Old EWS TOAST) What is the easiest solution to get working via OBD connector?? Read DME with Kess V2/VG Tech V54 and IMMO off with IUD 3.2?? Read with ROM Raider , Open MS41 or Siemens MS41 Flash Tool & remove EWS from file?? IMMO emulator?? - Still need to read ISN from DME & editor to write ISN to emulator?? Another way to read & write ISN to either EWS or DME then sync Or just burn it n have another beer??? Cheers |
|||
27-06-2017, 09:45 AM,
Post: #2
|
|||
|
|||
RE: E39 MS41.0 EWS ISN or IMMO Off
Send the original file ,galletto (PIN_OUT_ECUS)
|
|||
28-06-2017, 02:04 AM,
(This post was last modified: 28-06-2017, 02:53 AM by Enabled.)
Post: #3
|
|||
|
|||
RE: E39 MS41.0 EWS ISN or IMMO Off
Does car crank? Is starter working?
IF YES, just align EWS with INPA or similar (even the simple program called "EWSSync.exe"). If you have matched key and EWS module, you do not need delete. It's much simpler than that. IF NO (car does not crank): Post 24kb partial flash here and we can do it easy. EWS disable in MS41 is simple. Then you must remove EWS module and bridge the black/yellow starter lines. EWS delete in engine control module by itself will not solve issues with starter cranking (when key is mismatched). EWS module controls starter function. |
|||
28-06-2017, 09:29 AM,
Post: #4
|
|||
|
|||
RE: E39 MS41.0 EWS ISN or IMMO Off
Heya
Yes car cranks, but not start. Tried to sync with BMW scanner 1.4 - Fail Read file with FG Tech 24kb Cheers |