[maxmekker50]

Hello to you ALL

I have a problem with opel minerva 1.7 diesel from 2004, The car starts and i can drive few km and then it stops when it stops its activates and lamp on. I turn car off and reactivate by off on then can drive few km again

I have all kind of diag in the shop No fault codes at all, Eny Suggestion this ??

Reg
MAX

[Lenard6144]

Only real cause that I can think is it's losing its main power i.e. Check main battery and earth locations

[maxmekker50]

Only real cause that I can think is it's losing its main power i.e. Check main battery and earth locations

I gonna check that again But The strange is i can drive he car 10 km and bom stopp and klikk on key door close an up then starts again,, If not find solutione i cchange the ecu Immobox Instrument and see what happends then.

MAx

[okolo]

Hello to you ALL

I have a problem with opel minerva 1.7 diesel from 2004, The car starts and i can drive few km and then it stops when it stops its activates and lamp on. I turn car off and reactivate by off on then can drive few km again

I have all kind of diag in the shop No fault codes at all, Eny Suggestion this ??

Reg
MAX

Check or replace the engine speed sensor and the main relay.

Do not forget to check the ignition key contacts (shake the key when the engine is running).

See also the plug of the engine EСU.

[Dash_Burner]

Only real cause that I can think is it's losing its main power i.e. Check main battery and earth locations

I gonna check that again But The strange is i can drive he car 10 km and bom stopp and klikk on key door close an up then starts again,, If not find solutione i cchange the ecu Immobox Instrument and see what happends then.

MAx

No fault code in any unit of the car ?? Are you sure? Sometimes is not a problem of ecu. Maybe problem comes from another unit

[maxmekker50]

I have Checked almost all i can think of AND no faulty codes comming up Its a mystery I have done cars for 25 years , Onley One thing i now see i tryed all my diags also kessv2 cant read ecu but Fg tech i can read eeprom ,In kess v2 Not showing the voltage at all on odb stick so my be its a eart problem

[okolo]

I have Checked almost all i can think of AND no faulty codes comming up Its a mystery I have done cars for 25 years , Onley One thing i now see i tryed all my diags also kessv2 cant read ecu but Fg tech i can read eeprom ,In kess v2 Not showing the voltage at all on odb stick so my be its a eart problem

How can read errors if there is no voltage?

Well, so you need to measure the voltage on OBD stick.

[Ashraf6119]

Check this EDC Unit very common fault on them...........

[maxmekker50]

I have Checked almost all i can think of AND no faulty codes comming up Its a mystery I have done cars for 25 years , Onley One thing i now see i tryed all my diags also kessv2 cant read ecu but Fg tech i can read eeprom ,In kess v2 Not showing the voltage at all on odb stick so my be its a eart problem

How can read errors if there is no voltage? i CAN DIAG BUT VOLTAGE NOT SHOWING IN kESS V 2 I SAYED

Well, so you need to measure the voltage on OBD stick.

[QUIKCAR]

Hello to you ALL

I have a problem with opel minerva 1.7 diesel from 2004, The car starts and i can drive few km and then it stops when it stops its activates and lamp on. I turn car off and reactivate by off on then can drive few km again

I have all kind of diag in the shop No fault codes at all, Eny Suggestion this ??

Reg
MAX

take your diag in car and drive
open live Measured Values
control rpm /map/gasoil pression...
you will find the pb