[Zocker010]

Hello does anyone have very much ZDC Files for VCP, because i retrofit PLA 3.0 from Scirocco into MK5 and i need ZDC Container for the config.

Thanks for help.

[kreativ]

You need to download zdc files from vcp activator. If the file is not on the server you can request it by opening a ticket in their support site if you have a legal device

[Zocker010]

Yes i have a original device. Can you send me the link where i can open a ticket there?

Do you know how i encrypt ZDC Files where i can see which content is there in this file

[spyderboyant]

Yes i have a original device. Can you send me the link where i can open a ticket there?

Do you know how i encrypt ZDC Files where i can see which content is there in this file

I think you will find the files are coded when downloaded to be only used with your dongle... You must have an active subscription to download the files

[kreativ]

Yes i have a original device. Can you send me the link where i can open a ticket there?

Do you know how i encrypt ZDC Files where i can see which content is there in this file

This is the link for support section
https://vcpsupport.pl/otrs/customer.pl

You have to create new account and also have your vcp dongle serial number when opening a ticket

You can't see content of zdc files as they are crypted and only vcp support can decrypt them

[apoelistas]

You have a description at flash selection.

[aprietatuercas1974]

As you have said the partners must download it from the aktivator, and if you have a problem with some file that does not appear you should consult the support of vcp

[Zocker010]

Thanks a lot of your help. I have found the ticket system.

One question does I have. When i retrofit for example A5 Front Camera and I can't upload ZDC File to the Camera, my friend said that I can calibrate it with Odis-E. But does support Odis-E ZDC Files or give it another files to put the data sets into the devices?

[kreativ]

Thanks a lot of your help. I have found the ticket system.

One question does I have. When i retrofit for example A5 Front Camera and I can't upload ZDC File to the Camera, my friend said that I can calibrate it with Odis-E. But does support Odis-E ZDC Files or give it another files to put the data sets into the devices?

Of course you can calibrate camera with odis but that also requires you to have vas 6430 to do it also odis doesn't support zdc so you can't do that... sorry

But as I know for now there are som problems uploading zdc files for A5 front camera on some vehicles so its not just you who experience the problem

[Zocker010]

Yes i have a VAS 6430 table. But i retrofit a A5 Front Camera into Mk5 but first problem is that my Motor ECU does make trouble shooting when I want to put the ZDC file into control module and after solved this problem i get an upload error.

Which files does I need when i would upload data sets with ODIS-E?

Here is a picture of my VAS Table. If someone need the messurements or Adobe Illustrator File you can write me.