Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Q7 4M Bose retrofit help - no sound
20-09-2017, 00:37 AM,
(This post was last modified: 20-09-2017, 00:40 AM by spyderboyant.)
Post: #1
|
|||
|
|||
Q7 4M Bose retrofit help - no sound
Hi,
trying to retrofit BOSE into my Q7 4M from active sound (amplifier in MIB2). I have created a new loom to run the existing speaker cables back to the rear of the car where the amplifier is. I have run all speakers except for the surround ones in the roof as I need to remove the headliner (and cut it) to fit the new speaker grilles. When I re-code the 5F (MIB2) to use external amplifer I get no sound. I would have thought I would have got some level of audio from the amp. Could this be because the 5F needs a certain dataset (ie VCP) to be able to talk to the amplifier. My 5F is version 4M0 035 041 G. I know others that have factory BOSE have amplifier 4M0 035 035. Comparing a mates car in the UK with mine, we have all the same components except he has BOSE and I have active sound. I'm also seeing this error which doesn't mean anything to me along with Data set implausible errors. Could this mean my amp is stuffed? Its only a priority 6 fault: 0585 - Loudspeaker Channel 12 B13AB 01 [009] - Electrical Failure Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 1 Reset counter: 91 Mileage: 19771 km Date: 2017.06.01 Time: 11:10:44 Voltage terminal 30: 12.1 V 1600 - Data Set Implausible B2012 00 [009] - - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Reset counter: 91 Mileage: 19771 km Date: 2017.06.01 Time: 11:09:49 Voltage terminal 30: 12.1 V 1635 - Data Set Implausible B2012 00 [009] - - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Reset counter: 91 Mileage: 19771 km Date: 2017.06.01 Time: 11:09:49 Voltage terminal 30: 12.1 V 1636 - Data Set Implausible B2012 00 [009] - - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 1 Reset counter: 91 Mileage: 19771 km Date: 2017.06.01 Time: 11:09:49 Voltage terminal 30: 12.0 V (20-09-2017, 00:37 AM)spyderboyant Wrote: Hi, Comparing data sets in VCDS: Address 5F: Information Electr. Control Module Part Number: 4M0 035 041 G <<<<<<< Component and/or Version: MU-P-LND-RW 051 0976 Software Coding: 01370608FF0A000013511101000A00332F001BE601700104FE Work Shop Code: WSC 12345 VCID: 25023E9224AD7969BA-8070 Advanced Identification/FAZIT Serial number: Identification: JTB-074 Date: 10.11.15 Manufacturer number: 1192 Test stand number: 09BA Flash Status Programming Attempts(application): 0/4 Programming Attempts(data): 65535/1/8 Successful Attempts(data): 65535/1/8 Flash Date: 00.01.01 Flash Tool Code(data): 61029 123 12345 Misc. Hardware number: 4M0 035 041 A <<<<<<< Workshop System Name: J794 Equipment/PR Code: 000000021571CF5D Dataset Number: 4M0909545D <<<<<<<< Dataset Version: 0029 <<<<<<<<< ASAM Dataset: EV_MUHig6C3Gen2HBAS ASAM Dataset Revision: 001115 ============================== Address 5F: Information Electr. Control Module Part Number: 4M0 035 035 G Component and/or Version: MU-P-LND-EU 050 0976 Software Coding: 013706010000000013111102000A00332F001BE701700100BE Work Shop Code: WSC 00046 VCID: 281C34AD5335CA0764-807C Advanced Identification/FAZIT Serial number: Identification: JTB-074 Date: 05.08.15 Manufacturer number: 1182 Test stand number: 0E0C Flash Status Programming Attempts(application): 0/8 Programming Attempts(data): 65535/1/2 Successful Attempts(data): 65535/1/2 Flash Date: 00.01.01 Flash Tool Code(data): 61029 123 12345 Misc. Hardware number: 4M0 035 035 A <<<<<<< Workshop System Name: J794 Equipment/PR Code: 00000002E43D608C Dataset Number: 4M0909545C <<<<<<<< Dataset Version: 0023 <<<<<<<< ASAM Dataset: EV_MUHig6C3Gen2HBAS ASAM Dataset Revision: 001115 |
|||
20-09-2017, 18:26 PM,
Post: #2
|
|||
|
|||
RE: Q7 4M Bose retrofit help - no sound
The dataset error is because it is not well parameterized the unit with the configuration of bose, to me I happened recently in a unit mib2 of a Seat Leon
The parametrice with vcp and errors out and running. In vcp I think there was a file to bose that drive |
|||
20-09-2017, 21:02 PM,
Post: #3
|
|||
|
|||
RE: Q7 4M Bose retrofit help - no sound
(20-09-2017, 18:26 PM)aprietatuercas1974 Wrote: The dataset error is because it is not well parameterized the unit with the configuration of bose, to me I happened recently in a unit mib2 of a Seat Leon Did it have no sound until you paramertized the MIB2? |
|||
21-09-2017, 01:52 AM,
Post: #4
|
|||
|
|||
RE: Q7 4M Bose retrofit help - no sound
I think you need check with odis reotrofit it need remove CP
|
|||
21-09-2017, 02:00 AM,
Post: #5
|
|||
|
|||
RE: Q7 4M Bose retrofit help - no sound
CP had been removed
Sent from my SM-G935F using Tapatalk |
|||
21-09-2017, 04:42 AM,
Post: #6
|
|||
|
|||
RE: Q7 4M Bose retrofit help - no sound
If I had, but the logical thing is to remove the errors, apart that it may be that in behavior the behavior is different
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content