Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Siemens SID801A, read, write ECU
31-10-2017, 19:36 PM,
(This post was last modified: 31-10-2017, 21:33 PM by grmsek.damjan.)
Post: #1
|
|||
|
|||
Siemens SID801A, read, write ECU
Hello
Can anybody suggests me how to read, write this ecu? Citroen berlingo 2.0hdi, siemens SID801A Tools available; Kess 2.08 EU...(not support obd) Ktag rework 6.070 ...(not on the list,just 801 boot mode) MPPS V16 EU...(not on the list) Galletto china..-obd protocol;k-line(read write 512kb,flash 29f400bb boot mode pin 28 to mass) -boot mode protocol list(not on the list, just 801,802,805,806) I dont understand with galletto obd protocol and boot mode pin 28 to mass in help field bellow??? I know it would be the best with desolder flash and with programmer, but I dont have it Thankyou Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
01-11-2017, 00:16 AM,
Post: #2
|
|||
|
|||
RE: Siemens SID801A, read, write ECU
Nice collection of tools,
but, I have suggest you to R/W 29F400 on programmer..directly in socket, handly. Best and safer way, bellieve me!!! rgds, cuby |
|||
01-11-2017, 01:48 AM,
Post: #3
|
|||
|
|||
RE: Siemens SID801A, read, write ECU
Mppsv18 clon test ok
|
|||
01-11-2017, 08:37 AM,
Post: #4
|
|||
|
|||
RE: Siemens SID801A, read, write ECU
|