[MCube]

P.S. Use the Internet Explorer, because Chrome does not work correctly with the activation generator.

Chrome worked fine for me.

Hello to all.
I've already installed launcher pro 3. esys 3.28. pszdata 63.3
But still have dots on g32 bdc body 2.
Is there any way to get rid of dots? or am i doing something wrong?

Try removing some kiswb. Add x64 java.

Thank you very much!
I did as you said and it worked!
Copied jre folder from program files, pasted it in esys folder and renamed it jre_x64. Everything is ok now!

[AutoExe3219]

3.0.1 Build 63 - Release
- Fixed: Cheat codes without function names cannot be used, only previewed
- CAFD mapping optimization
- 32-bit JRE limited to 2GB in the code

Note: Maximum useable memory for 32bit JRE is about 1.4GB only and has to be contiguous free memory. Often times, allocating 1.4GB will fail. My success rate is about 30%

[masa52]

Where to download?

[Almaretto]

Where to download?

From original link provided by TM. Launcher Pro also has update feature to alert of new release (see image). There is popup as well as circle turns blue and can be clicked to redirect and open Mega link in browser.

[chang2]

Where to download?

From original link provided by TM. Launcher Pro also has update feature to alert of new release (see image). There is popup as well as circle turns blue and can be clicked to redirect and open Mega link in browser.

Hello,

this does not apply to the version V2.9.15.333.

I already wrote an email, unfortunately no answer.

thanks

[Almaretto]

Hello,

this does not apply to the version V2.9.15.333.

I already wrote an email, unfortunately no answer.

thanks

E-sys Launcher Pro 2.x is retired.
Launcher Pro 3.x is completely new program with different link and online activation.

[GaryWu]

Anyone, the same problem? The launcher V3.0 is activated, the launcher window closes after ESYS loads. Did not run ESYS?

[Almaretto]

Anyone, the same problem? The launcher V3.0 is activated, the launcher window closes after ESYS loads. Did not run ESYS?

How does E-sys Load and not run? Did you try re-launching? How about restarting?

[TokenMaster]

I already wrote an email, unfortunately no answer.

It's the holidays, and have a bit of emails to go through. I only have a couple of hours to allocate, so please bear with me.

Anyone, the same problem? The launcher V3.0 is activated, the launcher window closes after ESYS loads. Did not run ESYS?

If you are using the stock JRE and you chose max or custom over 1.4GB, this may happen. Also, check Event Viewer if you see anything there.

[masa52]

So how to obtain it ???
need to contact him personally or he sending link to pro users??
already sent him email but as always no answer