Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
05-12-2017, 06:35 AM,
Post: #601
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(05-12-2017, 00:30 AM)lucasm54 Wrote: Hey I have a question about software update if I upgrade to newest version to use a patcher2 Do I have virginized unit or will be ready virginized after soft updateRead the first page, after software upgrade the patcher will delete the existing fsc, fscs and sigs, when you check status only root accepted. |
|||
20-12-2017, 13:14 PM,
(This post was last modified: 20-12-2017, 15:38 PM by BMWdriva.)
Post: #602
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(03-08-2017, 03:16 AM)sebastianfernandes Wrote: Here you go....Carsever link no works FStool2 error 10802 what could be the problem? VIM HU_MGU-instruction for esys.
BMW FSC map update/CIC/NBT/NBTevo/EntryNav(Route) BMW FSC retrofit full set: CIC/NBT/NBTevo id4/5/6 screen mirroring Changing region map for EVO id 4/5/6+FullScreen apple carplay |
|||
20-12-2017, 15:48 PM,
Post: #603
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Your Fstool config is not correct
|
|||
29-12-2017, 17:51 PM,
Post: #604
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I try to log into FileCilla in CIC, but without success
Username: root Password: Hm83stN) or cic0803 Port, 21 Error access is denied I want to replace this file with generalPersistencyData_DiagnosticSWTController can someone please help me? |
|||
30-12-2017, 08:46 AM,
Post: #605
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(20-12-2017, 13:14 PM)BMWdriva Wrote: Carsever link no works You need to Install FSTool properly. It is important that you unzip the FStool in temp directory! Then follow EXCACTLY the Installguide. If you have Problems with 9C you need to update your Carserver Files My problem is that the Patch don't work. I tried it with 3 USB Sticks (FAT32) --> no sucess. CIC is ECE. I-Level --> Picture Any Ideas what could be the Problem? |
|||
06-01-2018, 14:27 PM,
Post: #606
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Hello everyone, I'm trying to activate a retrofitted nav of my mini r56.
The used unit comes from a 2012 mini. I have read several tutorials on the internet but I have not been able to activate yet. The first thing I did was to change the order by adding $6FP $6NE $6NF $6NM $6UH $6VC $6UM. Immediately after I coded with the usual technique of the empty file with ncs expert. Together with the unit I also mounted a combox. The next step was to change the chassis with tool32 to the 62 63 A0 control units. This was done correctly. I took the Europe MOVE 2018-1 map and put it on a 32GB formatted FAT32 stick. With the ICOM interface I was able to download the FSC file present in the unit using the SWID IB reader. I tried to generate an activation code for the map. unfortunately when trying to update the map the unit says that the code is not correct. I tried to run the script in this thread. However, the unit does not restart, so I thought the software is not correct. I tried another way. Since I do not have a d-link usb-ethernet adapter I have wired the ethernet port via the quadblock connector. Here it gets interesting. I created a DHCP server and assigned an IP to the nav. I can access via putty via telnet without using credentials. The thing that puzzles me is that the OS is a Windows CE! The script attached in this thread is .sh therefore for a Linux-based OS. Can someone tell me what I'm doing wrong? Thank You for all! |
|||
07-01-2018, 11:47 AM,
Post: #607
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
This morning I checked my champ sw version -> C13
I need to update to C1A and try again. Is it possible with ista-p to update only this ecu or i need to follow the software plan? |
|||
07-01-2018, 15:58 PM,
(This post was last modified: 07-01-2018, 16:01 PM by jeroenbmw.)
Post: #608
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(20-10-2017, 07:49 AM)syrus Wrote: I have an issue... Yes, You need first load the SIG CERT of all FSC, after that load the FSC certs of all FSC, and the load all FSC selft of all FSC, i know now it show accepted but actulally they are not (29-12-2017, 17:51 PM)georgia55 Wrote: I try to log into FileCilla in CIC, but without success Use old Password, or update firmware and use the one you show here. Old password is cic0803 |
|||
07-01-2018, 16:33 PM,
Post: #609
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(07-01-2018, 15:58 PM)jeroenbmw Wrote:(20-10-2017, 07:49 AM)syrus Wrote: I have an issue... yes I have tried, but without success |
|||
09-01-2018, 04:08 AM,
Post: #610
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(22-11-2017, 04:21 AM)sebastianfernandes Wrote:(22-11-2017, 01:01 AM)kino0924 Wrote:(21-11-2017, 15:46 PM)Pl@y3R Wrote:(21-11-2017, 12:09 PM)blax123 Wrote: Is there an easy way to remove the script activation by intel to use this FSC method?Yes, by ftp (putty,filezilla) or flash the cic I am still struggling with connecting via usb I picked up AX88772A chipset based usb adapter but it doesnt seems to be working. When I plug it to globebox usb, ethernet cable shows as disconnected. When I plug it to computer usb, etnernet cable shows as its connected. I think adapter works but CIC does not power this usb adapter. I tried on 2009 E90 (Factory CIC) as well but still no connection. Any specific steps to make it work? I thought usb2ethernet should be plug and play (at least connecting part not about ip address and communication) |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F20 cruise control retrofit | maninblack | 5 | 127 |
Yesterday, 18:09 PM Last Post: qbek90 |
|
BMW e87 LCI hralights retrofit problem | XeoN | 0 | 22 |
21-05-2024, 21:17 PM Last Post: XeoN |
|
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 308 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 54 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 257 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 420 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 111 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 225 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 107 |
08-05-2024, 14:22 PM Last Post: hitit |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,648 |
26-04-2024, 08:06 AM Last Post: smilo |
Users browsing this thread:
9 Guest(s)
9 Guest(s)
Return to TopReturn to Content